Specifications

PAPER CONFIG

This menu contains the following items.

PAPER NUMBER

When STANDARD is selected, the printer determines paper

thickness automatically. Select No. X (X can be any number

between 1 and 10) and set the following items.

❏ THICKNESS NUMBER

❏ CUT PRESSURE

❏ CUT METHOD

❏ PPR FEED ADJ

❏ DRYING TIME

❏ SUCTION

❏ PRINT ADJ

THICKNESS PAT

Prints the paper thickness detection pattern. If STANDARD is

selected in PAPER NUMBER, the pattern is not printed.

THICKNESS NUM

After confirming the paper thickness detection pattern, the

number for the print pattern with the smallest gap is entered.

CUT PRESSURE

Sets the cutter pressure (0 to 100%) for cutting paper. Lower the

pressure to cut weaker paper.