Specifications

59
PLATEN GAP
Normally, leave this set to STANDARD. If you find that the
printed image is smeared, select WIDE. Select NARROW for
printing on a thin paper and select WIDER for printing on a thick
paper.
When NARROW is selected, N is displayed on the LCD panel. W
is displayed when WIDE or WIDER is selected.
PAGE LINE
When you select ON, page lines are printed on the roll paper.
When you select OFF, page lines are not printed on the roll paper.
The Print Page Line operation changes according to the Auto Cut
settings as shown below.
Note:
When the Sheet light is on, the Print Page Line setting is not available.
Roll Auto Cut light Print Page Line Printer’s Operation
On On Prints page line on the right
side only, and cuts paper
automatically after the print
job.
On Off Cuts paper automatically
after the print job.
Roll Cutter Off light Print Page Line Printer’s Operation
On On Prints page lines on the right
side and below the
document.
On Off Does not print page lines nor
cut.