Specifications

53
LOAD PAPER SUCTION The paper lever is set to the release
position, or roll paper is detected at the
paper insertion slot. Besides, suction
pressure can be set easily by the user.
PAPER JAM Paper is jammed in the printer.
FRONT COVER OPEN The front cover is open.
SET PAPER LEVER The paper lever is set to the release
position.
PAPER NOT STRAIGHT The paper is not loaded straight. (If PPR
ALIGN CHK (Paper Align Check) is ON.)
RELOAD PAPER The printer cannot detect any paper.
SET INK CARTRIDGE Ink cartridge(s) is (are) defective or a
CSIC error has occurred.
INK OUT CONTINUE? The INK OUT MSG is set to ON.
NO INK CARTRIDGE You are replacing the ink cartridge(s).
INK LOW Ink cartridge(s) is (are) nearly empty.
Printout quality may decline when this
message is displayed.
Note:
If you continue printing in this status, print
out quality may decline.
COMMAND ERROR This message is displayed when the
installed printer software is not correct
for you printer.
OPTION I/F ERROR A Type-B I/F error has occurred.
SERVICE REQ XXXXXXXX A fatal error has occurred.
MAINTENANCE
REQ
XXXX A part used in the printer has nearly
reached the end of its service life. Note
the error number “XXXX” and contact
your dealer. See “Contacting Customer
Support”.
TURN PRINTER PWR OFF AND
THEN ON
After cleaning jammed paper, this
message appears. Turn the printer off
and on.
SET INK LEVER The ink lever is set in the up position.