Specifications

52
Status messages
The following messages show the printer status. For error
messages, see “Printer Stops Printing Unexpectedly”.
Sheet
Sheet is selected. Printing is on single sheet paper. The
printer ejects the paper.
Sheet
Sheet is selected in the printer driver, but Roll Auto Cut
or Roll Cutter Off is selected at the control panel.
All lights On Reset has been executed by pressing the Pause button
for 3 seconds or more.
READY Ready to print data
PRINTING The printer is processing data.
POWER OFF The printer is being turned off.
WAIT The printer is warming up, charging ink or
initializing.
INK CHARGING The printer is charging ink delivery
system. This message shows the progress
of the ink charging process.
PAUSE The printer is paused. To resume printing,
press the PAUSE button.
RESET The printer is being reset.
PRESS PAUSE BUTTON The printer is waiting for a trigger signal
to start media initialization.
PAPER OUT No media is set in the printer.
LOAD XXXXX PAPER The set media is different from the driver
setting concerning the Roll/Sheet media
setting.