Specifications

237
When the Operate light does not come on and mechanism
initialization does not start (even when the Power button is
pressed to turn on the printer), try the solutions listed for the
problem.
❏ Turn off the power and make sure the power cord is securely
plugged into the printer.
❏ Make sure your outlet works and is not controlled by a wall
switch or timer.
❏ Make sure the supplied voltage to the printer matches the
rating voltage labeled on the printer. If not, turn off the power
and unplug the power cord immediately. Contact EPSON for
assistance. See “Contacting Customer Support”.
c
Caution:
If the supplied voltage and rating voltage do not match, do not
plug the printer back in again, as damage may occur.
NO MAINTENANCE
TANK (TBD)
Maintenance tank is
not installed or not
attached correctly.
Install or attach the
maintenance tank
again. See “Replacing
Black Ink Cartridges”.
OPTION I/F ERROR Wrong I/F card is
installed.
Install the correct I/F card
after turning off the
power.
SERVICE
REQ.nnnnnnnn
All lights Flashing
A fatal error has
occurred.
Note the error number
“nnnnnnnn” and
contact your dealer. See
“Contacting Customer
Support”.