Specifications

236
UNABLE TO PRINT If an error occurs, or
the ink lever is at the
up position, you try to
print a test pattern
(nozzle check, status
check, head
alignment, or paper
thickness pattern)
from the SelecType
settings.
After 3 seconds the
message disappears.
Press the Pause button to
exit the SelecType mode.
When an error or status
message appears again,
clear and perform
printing a test pattern
again.
INK OUT
Y/LM/M/LC/C/K/LK
Ink cartridge(s) is
(are) empty.
Replace the ink
cartridge(s) as indicated
by the lights. See
“Replacing Ink
Cartridges”.
NO INK CARTRIDGE
Y/LM/M/LC/C/K/LK
Ink cartridge(s) is
(are) not installed.
Install ink cartridge(s) as
indicated by the lights.
See “Replacing Ink
Cartridges”.
WRONG CARTRIDGE
Y/LM/M/LC/C/K/LK
Wrong ink
cartridge(s) is (are)
installed.
Use the correct ink
cartridge(s).
CSIC ERROR (TBD)
Y/LM/M/LC/C/K/LK
Ink cartridge(s) is
(are) not installed or
not attached
correctly.
Replace the ink
cartridge(s). See
“Replacing Ink
Cartridges”.
MAINTENANCE TANK
FULL
Maintenance tank is
full with waste ink.
Replace the
maintenance tank. See
“Replacing Black Ink
Cartridges”.