Specifications

218
When you set up the printer after transporting, see “Setting up
the printer after transporting it”. Before you use the printer after
transporting, you may need to perform a nozzle check and realign
the print heads. See “Using the Printer Utilities” for Windows, or
“Using the Printer Utilities” for Macintosh.
To move the printer using casters
When you want to transport the printer a very short distance such
as within the same room, you can slide the printer on its casters.
c
Caution:
Do not slide the printer on angled or uneven surfaces.
1. Make sure that the power cord, interface cable, roll paper
spindles and sheet media are removed, and the roll paper
cover and front cover are closed.
Note:
If you only need to transport your printer a very short distance using
the casters, you do not need to remove the ink cartridges.
2. Fully insert the upper and lower hooks, then roll up the paper
basket as shown below.