Specifications

215
A short distance
When you need to move the printer a short distance, follow the
steps below.
1. First turn off the printer and make sure the print heads are in
the home (far right) position. If not, turn the printer back on,
wait until the print heads move to the home position, then
turn off the printer.
2. Remove the following parts:
❏ Power cord
❏ Interface cable
❏ All ink cartridges
❏ Paper basket
❏ Roll paper spindle
❏ Roll and cut sheet media
❏ Optional Auto Take-Up Reel Unit (if installed)
❏ Optional Manual Cutter Unit (if installed)
3. Make sure that the ink cartridge clamps and the cover are
closed.