Specifications

209
To replace the paper cutter, follow the steps below.
1. Make sure that the printer is on.
2. In SelecType mode, press the Paper Feed (
u) or Paper Feed
(
d) button until MAINTENANCE is displayed on the LCD panel,
and press the SelecType button again.
3. Press the Paper Feed (
u) or Paper Feed ( d) button to
display CUTTER REPL.
4. Press the SelecType button. EXEC is displayed on the LCD
panel, then press the Enter button.
c
Caution:
Never move the paper cutter holder by hand. Otherwise, damage
to your printer may occur.
5. When the paper cutter holder stops at the replacement
position, OPEN FRONT COVER appears. Open the front cover.