Specifications

204
Checking the maintenance tank
If NOT ENOUGH SPACE IN MAINTE TANK and REPLACE WITH NEW
MAINTENANCE TANK are displayed on the LCD panel, replace the
Maintenance Tank with a new one.
This completes the check of the Maintenance Tank. Now you are
going to drain the ink
Draining the Ink
1. Set the ink lever in the upper position after confirming that
READY FOR DRAINING is displayed on the LCD panel.
2. After confirming that INSERT DRAINING CARTRIDGE IN #X is
displayed on the LCD panel, insert the Draining cartridge into
the ink slot indicated by the blinking LED on the control
panel. Then SET INK LEVER is displayed on the LCD panel.
3. Set the ink lever in the down position.
DRAINING xxx% is displayed on the LCD panel, and the printer
drains the remaining ink to the Maintenance tank.