Specifications

176
5. Close the roll paper cover or see “Loading the roll paper”
following to load paper.
Loading the roll paper
To load roll paper, follow the steps below.
Note:
You may want to setup the paper basket before printing. See “Setting
the Paper Basket”.
1. Open the roll paper cover. Make sure that the roll paper is
attached to the printer properly.
2. Make sure that the printer is on.
3. Press the Paper Source button repeatedly until the Roll Auto
Cut light or Roll Cutter Off light is on.
c
Caution:
If you are loading thick roll paper, select Roll Cutter Off.
Paper that is too thick may damage the paper cutter.