Specifications

155
Auto Cut
When Auto Cut is selected the roll paper will be cut automatically
after each print job.
To enable Auto Cut, select the Auto Cut check box in the “Page
Setup dialog box”.
Print Page Line
You can specify whether to print a page line on the right side, and
also below the document for manual cutting.
To enable Print Page Line, select the Print Page Line check box
in the “Page Setup dialog box”.
The Print Page Line operation changes according to the Auto Cut
setting as shown.
Save Roll Paper
Select this check box when you wish to save roll paper. When this
check box is selected, the blank portion of the last page of your
document is not fed through the printer. This function is available
only when Roll Paper (Banner) is selected from the Paper Source
list.
Auto Cut Print Page Line Printer’s Operation
Selected Selected Prints page line on the right side
only, and cuts paper
automatically after the print job.
Selected Not selected Cuts paper automatically after
the print job.
Not selected Selected Prints page lines on the right side
and below the document.
Not selected Not selected Does not print page lines nor cut.