Owner`s manual

Menu Options
■ ■ ■ ■ ■
■
61
7. Next, the Zoom rate setting window appears on the
screen. Select a rate using the arrow buttons or Enter
button, then press the Enter button.
8. The message “Do you save this user logo?” appears on the
screen. Select Yes and press the Enter button If you don’t
want to save the logo, select No.
♦
Note: Saving the logo may take a moment. Do not use the
projector or other sources (computer, video, speaker, etc.) while
the logo is being saved.
9. When the message “Saving the user logo is completed”
appears on the screen, press the Menu or Enter button to
display the Main Menu.
Assigning the Logo to the A/V Mute Button
Follow these steps to assign the logo to the A/V Mute
button:
1. Press the Menu button to open the Menu window.
2. Select the Setting menu and press the Enter button.
3. Select the Blank option (A/V Mute), then highlight User
Logo.
4. Press the Menu button twice.
Now you can press the A/V Mute button on the operation
panel or the remote control to display the user logo.