Owner`s manual

■
■ ■ ■ ■
60
User's Logo Menu
The User’s Logo menu lets you display a custom logo on the
screen.
Creating a user logo requires two steps:
• Storing a user logo
• Assigning the logo to the A/V Mute button
Storing a User Logo
Follow these steps to capture and store a logo:
1. Display the image(with the projector) you wish to use as a
logo.
2. Press the Menu button to open the Menu window.
3. Select the User’s Logo menu option by pressing the down
arrow button on the operation panel or the Enter button
on the remote control. Then press the Enter button to
display the User’s Logo Setting window.
4. The message, “Do you use the present image as a user
logo?” appears on the screen. Choose Yes or No by
pressing the left or right arrow buttons on the control
panel or pressing left or right of the Enter button on the
remote control. Then press Enter.
5. A selection box will appear over the image. To select the
portion of the image you wish to use as the logo, use the
arrow buttons on the operation panel or the Enter button
on the remote control. Once you have selected the desired
area, press the Enter button.
6. The message “Do you use this image?” appears on the
screen. Select Yes and press the Enter button. If you want
to change the position, select No.