Owner`s manual

■
■ ■ ■ ■
54
Menu item Description
Position Select this item by pressing the Enter button to enter
the screen position adjustment mode. Then use the
Enter button (remote) or up, down, left and right
buttons (operation panel) to move the screen position
in the corresponding direction.
When you finish making adjustment, press the Esc
button to return to the Video submenu.
Tracking Matches the projector’s internal clock to various
computer graphic signals. Adjust this setting to
remove vertical lines from the image.
Sync. Synchronizes with the tracking signal sent from the
computer. Adjust this setting to correct fuzziness or
screen flicker.
Brightness Lightens or darkens the overall image. Increase
brightness to lighten an image, or decrease it to
darken the image.
Contrast Adjusts the difference between light and dark areas.
Increase the contrast to make light areas lighter and
dark areas darker. Decrease it to minimize the
difference between light and dark areas.
Color Adjusts the color balance (Red:Green:Blue) of the
input source.
Select this item by pressing the Enter button. The
projector will enter color adjustment mode. Use the
Enter button (remote) or the up and down buttons
(operation panel) to select a color.
Next, use the Enter button (remote) or left and right
buttons (operation panel) to adjust the selected color.
Increase the color setting for more intense color, or
lower the setting for less intense color. When you
finish making adjustment, press the Esc button to
return to the Video submenu.
Sharpness Adjusts the screen sharpness.
Increase the sharpness to make screen images more
sharp, or decrease it to make the images less sharp.