Owner`s manual
Table Of Contents
- Front Cover
- Important Information
- QUICK START
- Contents
- Introduction
- Installation
- Using the Projector
- Using the Projector Menus
- Using the ELP Link IV Software
- Presentation support function
- Projector setting function
- System requirements
- Projector Software CD-ROM
- Connecting the Cables
- Installing the Projector Software on Your PC
- Installing the Projector Software on Your Macintosh
- Accessing the Projector Software
- Installing or Accessing the Projector Software on the CD-ROM Directly
- Maintenance
- Troubleshooting
- Technical Specifications
- Glossary
- Index
- After sales service contact addresses
- Back Cover
Projector Status Indicators
■ ■ ■ ■ ■
■
47
Lamp Indicator
Displays lamp condition.
This indicator is off when the projector is in a normal
condition.
Temperature Indicator
Displays the internal temperature condition.
This indicator is off when the projector is in a normal
condition.
Color Status Meaning
- Off Lamp is functioning normally.
Orange Flashing Projection lamp has reached the end of its
life and will not longer project images.
Replace the projection lamp with a new
one.
Red Flashing There is a problem with the projection
lamp, lamp power supply, lamp fuse, or a
circuit malfunctioned in the projector.
Color Status Meaning
- Off The projector is functioning normally.
Orange Flashing The projector is too hot.
Red Lit The projector has turned off automatically
because of over heating.
Red Flashing There is a problem with the cooling fan or
temperature sensor.