Owner`s manual
Table Of Contents
- Front Cover
- Important Information
- QUICK START
- Contents
- Introduction
- Installation
- Using the Projector
- Using the Projector Menus
- Using the ELP Link IV Software
- Presentation support function
- Projector setting function
- System requirements
- Projector Software CD-ROM
- Connecting the Cables
- Installing the Projector Software on Your PC
- Installing the Projector Software on Your Macintosh
- Accessing the Projector Software
- Installing or Accessing the Projector Software on the CD-ROM Directly
- Maintenance
- Troubleshooting
- Technical Specifications
- Glossary
- Index
- After sales service contact addresses
- Back Cover
■
■ ■ ■ ■
46
Projector Status Indicators
The power and lamp indicators at the top of the projector tell
you its operating status.
♦
Caution:
A red indicator warns you if a serious problem occurs.
See Chapter 6, “Troubleshooting,” for what to do if a warning
light comes on.
Operation Indicator
Displays machine condition.
Color Status Meaning
Orange Lit Sleep mode.
Green Flashing The projector is warming up. Allow about
30 seconds.
Green Lit Power and projection lamp are on.
Orange Flashing Projection lamp is off, and the projector is
cooling down Cooling time depends on
the air teperature. During the cooling, any
operations can not be executed.
Red Lit There is an internal projector problem.
- Off The power to the projector has been cut
off.
Operation Indicator
Temperature Indicator
Lamp Indicator