Owner`s manual
Table Of Contents
- Front Cover
- Important Information
- QUICK START
- Contents
- Introduction
- Installation
- Using the Projector
- Using the Projector Menus
- Using the ELP Link IV Software
- Presentation support function
- Projector setting function
- System requirements
- Projector Software CD-ROM
- Connecting the Cables
- Installing the Projector Software on Your PC
- Installing the Projector Software on Your Macintosh
- Accessing the Projector Software
- Installing or Accessing the Projector Software on the CD-ROM Directly
- Maintenance
- Troubleshooting
- Technical Specifications
- Glossary
- Index
- After sales service contact addresses
- Back Cover
Connecting to a Computer
■ ■ ■ ■ ■
■
19
5. To also view the video on the computer’s monitor, attach
the large end of the Macintosh monitor adapter to the
monitor cable and connect the other end of the adapter to
the projector’s Computer Out port.
6. Tighten the screws on all the connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the
ELP Link IV software, you need to connect the main cable. It
provides connectors for:
• The Mac mouse cable or USB mouse cable (to use the
remote control as a mouse)
• The Mac serial cable (to use the ELP Link IV software and
the Effects buttons on the remote control)