Owner`s manual

Connecting to a Computer
■ ■ ■ ■ ■
■
9
1. If you will be viewing the video on your computer
monitor as well as the projector screen, disconnect the
monitor cable from the video port on the back of your
computer. Then connect the monitor cable to the
projector’s Computer Out port, as shown below. (This is
useful when you need to view the video output, but the
projection screen is behind you.)
2. Connect one end of the computer cable to the projector’s
Computer 1 port. (Use the Computer 2 port if you are
connecting a second computer.)
3. Connect the other end of the computer cable to the
computer’s video port.
4. Tighten the screws on all connectors.