User`s guide

Maintaining the Projector 99
9. Grasp the handles as shown and pull the lamp straight out.
10. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
11. Once the lamp is fully inserted, tighten its screws and replace the
cover, then tighten the cover screw. (The projector won’t come on
if the lamp cover is loose.)
12. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the
Menu button on the remote control or on the
projector’s control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
Reset, then press Enter.
You see this screen:
User's Guide.book Page 99 Tuesday, May 25, 2004 11:49 AM