User`s guide

98 Maintaining the Projector
4. Turn the projector over and remove the air filters at the side and
bottom of the projector.
5. Insert the two new air filters. They should click into place.
6. Turn the projector back over.
7. Loosen the screw holding the lamp cover in place (you don’t need
to remove it). Then remove the lamp cover.
8. Loosen the two screws holding the lamp in place (you don’t need
to remove them).
Loosen, but don’t
remove these
User's Guide.book Page 98 Tuesday, May 25, 2004 11:49 AM