User`s guide

30 Displaying and Adjusting the Image
Using the Direct Power On Function
The Direct Power On function enables fast and easy setup and shut
down. This feature is convenient for ceiling mounted projectors
because you can simply flip a switch that is connected to the power
outlet for the projector to turn it on or off. For desktop or table-top
use, you can quickly unplug the projector immediately without having
to wait for it to cool down. Then you can pack up the projector and
go.
Follow these steps to enable Direct Power On:
1. Press the
Menu button on the remote control and select the
Extended menu.
2. Choose
Operation and press Enter.
3. Choose
Direct Power On and press Enter.
4. Highlight
On and press Enter.
5. Press
Esc or Menu to exit.
User's Guide.book Page 30 Tuesday, May 25, 2004 11:49 AM