Specifications

9
8. How do I print just one color or just one plate?
When used to create plates, the EFI RIP, considers each detected color (spot color or process color) a
separate page. Use the preview window to view the job to see the associated spot color to that page, as
shown below.
In the example above, Pantone 363c is Page 1. If you only wanted to print a single plate which is
Pantone 363c, you would direct the RIP to print only Page 1. To do this, select the Print Tab from the
property window (on the right) with the job you want to print selected. Under the “device” sub tab select
“Page/Sheet” and indicate what pages you want to print. In the case of the above example, you would
select “1” and then print the job.