Specifications

2
Epson DirectPlate Aluminum Questions
1. How do these plates work?
2. What is the highest resolution these Plates will support?
3. Do I need to gum the plates?
4. Are the plates anodized?
5. Are these plates light sensitive?
6. Do these Plates have Grain?
7. Can I cut/ convert these plates?
8. What is the shelf life of the Epson DirectPlate Aluminum?
9. Can I reuse plates after they have been used on press?
10. Can I use a Deletion pen?
11. Are these plates made by Epson?
12. How many impressions can I get out of a plate?
13. What if I have a plate with a bent corner, Can I use that?
14. Are these plates dry when they come out of the Epson Printer?
15. What happens if a plate looks darker after if comes out of the PCU?
16. How do I load a plate into the printer?
17. Do I mount these plates like any normal plate on my press?
18. What happens if I see small dots on the press sheet?
19. What happens if I see alignment issues?
20. What if I see lines on the press sheet in the direction of the plate travel through the PCU?
21. What happens if I don’t get the number of impressions I’m expecting?
Press Integration Questions
1. What fountain solution should I use?
2. What is the recommended PH level of the fountain solution?
3. What plate cleaner do I need?
4. What is different about how I would use an Epson DirectPlate?
5. What about a press wash?
6. What type of Ink should I use?
7. What presses and plate sizes are supported by Epson DirectPlate?