Specifications

12
For example: if you want to create a Plate preset, you would save the Layout settings to include my Plate
bend and gripper edge, assure that the correct LPI and Media set is selected, etc. Once you are sure you
have all of the settings you want to use for this particular preset, click the “Save” button at the bottom of the
Preferences dialog box. (see below).
You are prompted to enter a name for this preset. Once completed you can exit the preferences window.
The name of the preset now appears on the drop down menu from the main RIP screen toolbar (see below).
You can select your preset for that particular “workflow” from the main menu drop down at any time. Repeat
this process for each plate size and proofing workflow you plan to use.
Note: When you want to use a preset, you must
select the preset setting from the menu bar FIRST and
click “apply” prior to loading the job into the RIP or printing to the RIP from another workstation. If you don’t
do this, the presents wont take effect and you will have to manually select each setting.