Specifications

ManualsBrandsEpson ManualsProjector7600 - EMP XGA LCD Projector

EPSON PowerLite 5600p and 7600p Projectors

1/01 EPSON PowerLite 5600p and 7600p Projectors - 3

Projector Specifications

General

Type of display Poly-silicon Thin Film Transistor (TFT)

Size of liquid

crystal panels Diagonal: 1.3 inches (33.6 mm)

Lens F=1.7 to 2.3, f=49 to 63 mm

Resolution 1024

768 pixels (PowerLite 7600p)

800

600 (PowerLite 5600p)

Color reproduction 24 bit, 16.8 million colors

Brightness 2200 lumens (ANSI)

Contrast ratio 400 : 1 (PowerLite 7600p)

300 : 1 (PowerLite 5600p)

Image size 22 to 300 inches

Projection distance 3.6 to 47.9 feet (1.1 to 14.6 meters)

Projection methods Front, rear, upside-down (ceiling mount)

Internal speaker

system two 3-watt stereo speakers

Optical aspect ratio 4 : 3 (horizontal : vertical)

Zoom ratio 1 : 1.3

Noise level 36 dB

Keystone correction

angle ± 30° maximum

Projection Lamp

Type UHE (Ultra High Efficiency)

Power

consumption 200 W

Lamp life About 1500 hours

Part number ELPLP12

Remote Control

Range 32.8 feet (10 meters)

Batteries Alkaline AA (2)

Mouse Compatibility

Supports PS/2, USB, serial, ADB (optional cable required for

serial and ADB)

Remote IR Receiver

Supports EPSON Remote IR Receiver, 10-foot cable (typical

use for rear screen projection)

foot adjust lever

control panel

status lights

front infrared

sensor

speaker

handle

zoom ring

focus ring

adjustable

foot

A/C power inlet

rear infrared

sensor

connector panel

(see below)

Computer 2 /

Component Video

Computer 1

Analog Digital

Audio 1 Audio Out

Control (RS-232C) Mouse

S-Video

L-Audio2-RVideo

Remote

DVI connector

VGA (video in) connector

VGA / DVI

switch

optional remote

receiver

connector

S-Video

connector

serial connector for computer

running EMP Link V software

Computer 2/

Component

Video connector

composite

(RCA)

video

connector

Audio out

connector

audio

connectors

for video

sources and

Computer 2

Mouse connector

(for Computer 1)

Audio 1

connector

Summary of content (11 pages)

PAGE 1
EPSON PowerLite 5600p and 7600p Projectors Projector Specifications control panel status lights speaker General front infrared sensor adjustable foot Type of display Poly-silicon Thin Film Transistor (TFT) Size of liquid crystal panels Diagonal: 1.3 inches (33.6 mm) Lens F=1.7 to 2.3, f=49 to 63 mm Resolution 1024 × 768 pixels (PowerLite 7600p) 800 × 600 (PowerLite 5600p) Color reproduction 24 bit, 16.
PAGE 2
EPSON PowerLite 5600p and 7600p Projectors Dimensions . Height 6.1 inches (156 mm) Width 11 inches (280 mm) Depth 15.9 inches (403 mm) Weight 14.9 lb (6.8 kg) Mode Refresh Rate (Hz) Resolution VGACGA 70 640 × 400 VGAEGA 70 640 × 350 VGA60 59.94 640 × 480 VGA72 72.809 640 × 480 Electrical VGA75 75 640 × 480 Rated frequency 50 to 60 Hz VGA85 85.008 640 × 480 Power supply 100 to 120 VAC, 3.4 A 200 to 240 VAC, 1.7A NEC400 56.65 640 × 400 SVGA56 56.
PAGE 3
EPSON PowerLite 5600p and 7600p Projectors Mode Refresh Rate (Hz) Resolution HDTV480P (ANSI/ SMPTE) 59.94 720 × 483 HDTV480P (ATSC) 59.94 704 × 480 HDTV480I (ANSI/ SMPTE) 59.94 720 × 487 HDTV480I (ANSI/ SMPTE) 59.94 1920 × 1080 HDTV480I (ATSC) 59.94 704 × 480 HDTV720P (SMPTE) 59.94 1280 × 720 HDTV1080I (ANSI/ SMPTE) 59.94 1920 × 1080 HDTV1080P (ANSI/ SMPTE) 59.
PAGE 4
EPSON PowerLite 5600p and 7600p Projectors Image Size and Projection Distance The projector can be installed for three different viewing setups: front projection, ceiling mounting, or rear projection onto a semi-transparent screen, as shown: Use the tables below to estimate how far to place the projector from the screen. Since the size of the image can be changed by rotating the zoom ring, a range of distance is given for each screen size.
PAGE 5
EPSON PowerLite 5600p and 7600p Projectors 2. Click the Arrange icon and drag one monitor icon on top of the other. Displaying an Image Click here Once the projector is connected to your computer or video source and plugged in, press the red Power button on top of the projector to turn it on. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the message No Signal displayed.
PAGE 6
EPSON PowerLite 5600p and 7600p Projectors Resizing the Image Projector Status Lights Some computer images need to be resized to display in the projector’s native format. If only part of your computer image is displayed, you can correct it with the Resize button. The lights on top of the projector indicate the projector’s operating status. ❏ Press the Resize button on the control panel. The screen image is automatically compressed.
PAGE 7
EPSON PowerLite 5600p and 7600p Projectors Light Status Description and action Button Function Flashing orange The projector is getting too hot. Turn it off and let it cool. Make sure the temperature surrounding the projector does not exceed 104° F and there is plenty of space around and under the projector for ventilation. Clean the air filter if necessary. Esc Stops the current function. Pressing Esc while viewing a menu or the online help displays the previous screen or menu.
PAGE 8
EPSON PowerLite 5600p and 7600p Projectors This table summarizes the functions on the remote control. The remote control buttons are shown in the following illustrations. signal output Button Function Power Starts or stops the projector. Power R/C on/off Turns the remote control on or off. on/off switch Freeze Keeps the current computer or video image on the screen. A/V mute Turns off the audio and video, displaying the black, blue, or user logo background.
PAGE 9
EPSON PowerLite 5600p and 7600p Projectors Button Function Preset Saves and recalls up to five different session settings (resolution, tracking, sync signal, and position). To save the current session settings, press the Preset button and it will be assigned the next available number, 1 through 5. To recall a setting, press the Preset button a second time and move to the desired session number. To overwrite a saved setting, move to the setting you want to replace and press Enter.
PAGE 10
EPSON PowerLite 5600p and 7600p Projectors Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP12. 4. If you need to replace the filter, make sure the projector is on its side as shown (not turned upside down) to prevent dust from falling inside. Then release the latch to remove the filter. Follow these steps to replace the lamp: 1. Turn off the projector and unplug the power cord. 2.
PAGE 11
EPSON PowerLite 5600p and 7600p Projectors You can purchase these accessories from your dealer or by calling EPSON at (800) 873-7766; or visit the EPSON Store at www.epson.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. 7. Once the lamp is fully inserted, tighten its screws. 8. Replace the lamp cover and tighten its screw securely. (The projector won’t come on if the lamp cover is loose.) 9. Reset the lamp timer as described in the following section.