Specifications

Epson PowerLite 755c/765c Projector
8/05 Epson PowerLite 755c/765c Projector - 13
Configuring the Network Settings for Windows
Before connecting to the projector wirelessly, make sure your
computer is configured correctly. Also, make sure that the
Internet Connection Firewall is disabled. (See your Windows
online help system for details.)
Note:
Depending on your computer’s wireless network adapter card,
the dialog boxes you see may be different than those shown in
this section.
1. Access your wireless network Properties window. For
example, in Windows XP click
Start > Control Panel >
Network and Internet Connections
. Then double-click
the
Network Connections icon. You see a screen similar to
this:
2. Right-click the
Wireless Network Connection icon and
select
Properties. You see a screen like this:
3. Click the
Configure button. Then click the Advanced tab
on the screen that appears. You see a screen like this:
4. Ad hoc mode: Highlight
Network Type in the Property list
and set the Value to
802.11 Ad Hoc.
Access point mode: Highlight
Network Type and set the
Value to
Infrastructure.
5. Ad hoc mode: Highlight
SSID and set the Value to match
the name you gave the projector’s ESSID (for example,
CONF ROOM).
Access point mode: Highlight
SSID and set the Value to
match the name assigned to the access point.
Note:
The SSID is case-sensitive.
6. Highlight
Encryption and make sure it is disabled.
7. Click the
General tab and make sure the network card or
wireless network device is enabled.
8. Ad hoc mode: Click
OK to close the network card’s
properties dialog box. Then go to “Projecting Wirelessly” on
page 15.
Right-click and
select Properties
Click here