User`s guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Setting Up the Projector
- Projecting
- Using the Remote Control
- Configuring the Projector
- Monitoring the Projector Over a Network
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
94 Solving Problems
Using On-Screen Help
If the image doesn’t look right or your audio isn’t working, you can
get help by pressing the blue
? Help button on top of the projector or
on the remote control. The following choices are available:
■ No image appears on the screen
■ The image is not in focus
■ The image is unsteady
■ The image colors don’t look right
■ The image is too dark
■ The image is distorted
Follow these steps to get help:
1. Press the green
? Help button on the projector.
You see the Help menu:
2. Use the pointer button on the remote control or the arrow
buttons on the projector to highlight menu items.
3. After highlighting a menu item, press the
Enter button on the
remote control or on the projector to select it.
4. To exit the Help system, press the
? Help button.