User`s guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Setting Up the Projector
- Projecting
- Using the Remote Control
- Configuring the Projector
- Monitoring the Projector Over a Network
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
Monitoring the Projector Over a Network 75
Connecting to the Network
Follow these steps to connect the projector to your network and
configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT Ethernet network cable.
Connect the cable to the
LAN port on the projector.
2. Press the projector’s P
Power button to turn it on.