Specifications

REV.-A
(
Table 1-3. Specifications for Cut Sheets
Width
148 mm to 257 mm (5.8 in. to 10.1 in.) (top insertion)
182 mm to 257 mm (7.2 in. to 10.1 in.) (front insertion)
Length 364 mm (14.3 in.), maximum
Thickness
0.065 mm to 0.14 mm (0.0025 in. to 0.0055 in.)
Weight 14 lb to 24 lb (52.3
g/m’*2 to 90 g/m**2)
Quality plain paper or recycled paper(under normal temperature)
Table 1-4. Specifications for Cut Sheets (Carbonless Duplicating Paper)
Width
182 mm to 216 mm (7.2 in. to 8.5 in.)
Length
257 mm to 297 mm (10.7 in. to 11.7 in.)
Thickness
0.12 mm to 0.32 mm (0.0047 in. to 0.012 in.)
Weight
12 lb to 15 lb (40
g/m**2 to 58 g/m**2)
Quality
Carbonless duplicating paper
Copies
4 sheets (1 original and 3 copies)
Table 1-5. Specifications for Continuous Sheets
Width
Copies
Quality
Thickness
Weight
Size
Copies
Thickness
Weight
Quality
101 mm to 254 mm (4.0 in. to 10.0 in.)
4 sheets (1 original and 3 copies)
plain or carbonless multi-part paper
recycled paper(under normal temperature)
0.065 mm to 0.10 mm (0.0025 in. to 0.0039 in.) - single sheet
0.065 mm to 0.32 mm (0.0025 in. to 0.012 in.) - total
14 lb to 22 lb (52.3
g/m**2 to 82 g/m**2) - single sheet
12 lb to 15 lb (40
g/m**2 to 58 g/m**2) - each
Table 1-6.
EnveloDes
No. 6 166 mm x 92 mm
No. 10 240 mm x 104 mm
Not available
0.16 mm to 0.52 mm (0.0063 in. to 0.0197 in.)
Differences in thickness within the printing area must be less than
0.25 mm (0.0098 in.)
12 lb to 24 lb (45
g/m**2 to 91 g/m**2)
Bond paper, plain paper, airmail
NOTES: a. Printinci on envelopes is available only at normal temperatures and only using top insertion.
b. Keep tie longer side of the envelope-horizontal during insertion.
c. Place the left edge of a No. 6 envelope at the sheet guide setting mark.
Table 1-7. Labels Specifications
Label size
2 1/2 in. x 15/16 in.
4 in. x 15/16 in.
4 in. x 17/16 in.
Copies
Not available
Thickness 0.07 mm to 0.09 mm (0.0028 in. to 0.0031 in.) - base paper
0.16 mm to 0.19 mm (0.0063 in. to 0.0075 in.) - total
NOTES: a. Printing on labels is available only at normal temperatures.
b. Labels must be of the fanfold type.
c. Labels with pressure sensitive paper must be pasted along the perforation and tractor holes and the
total thickness must be less than or equal to 0.3 mm (0.0118 in.). Labels can be printed out only
if
the temperature is between 5 and 36 degrees C (41 and 95 degrees F) and humidity is between
10 O/. and 80
YO RH.
d. Recommendation
AVERY CONTINUOUS FORM LABELS
AVERY MINI-LINE
MBELS
f. Labels must be used with the pull tractor unit (front or button)
g. Do not perform reverse feeds.
1-5
I