User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-INSTALLATION
- CHAP 2-USING THE PROJECTOR
- CHAP 3-USING THE PROJECTOR MENUS
- CHAP 4-USING THE ELP LINK II SOFTWARE
- CHAP 5-MAINTENANCE
- CHAP 6-TROUBLESHOOTING
- CHAP 7-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
1 • Installation
28
2.Connect the cable’s 3.5 mm stereo miniplug to the projector’s
Audio Out jack.
3.Connect the RCA plugs to the external amplified speaker or PA
system. Insert the cable’s red plug into the Audio In R jack, and
the white plug into the Audio In L jack.
pro-ch1.fm Page 28 Friday, November 7, 1997 5:22 PM