User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-INSTALLATION
- CHAP 2-USING THE PROJECTOR
- CHAP 3-USING THE PROJECTOR MENUS
- CHAP 4-USING THE ELP LINK II SOFTWARE
- CHAP 5-MAINTENANCE
- CHAP 6-TROUBLESHOOTING
- CHAP 7-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
7 • Technical Specifications
98
Monitor and Computer In 1/2 connector pin assignments
The Monitor and Computer In 1/2 connectors are female video RGB,
15-pin micro-D-style connectors. The pin assignments are:
Input pin Monitor connector signals Computer In 1/2 connector signals
1 Red out / red video Red video
2 Green out / green video Green video
3 Blue out / blue video Blue video
4 Reserved Monitor (ID bit 2)
5GND GND
6 GND Red video GND
7 GND Green video GND
8 GND Blue video GND
9 Reserved +5 V
10 GND Synchronous GND
11 Reserved Monitor (ID bit 0)
12 Reserved SDA
13 Horizontal sync Horizontal sync
14 Vertical sync Vertical sync
15 Vertical sync Reserved
pro-ch7.fm Page 98 Friday, November 7, 1997 5:25 PM