Photo Printer User Manual
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
Maintenance and Transportation 183
c
Caution:
❏ Never use alcohol or paint thinner to clean the printer; these chemicals can
damage the components as well as the case.
❏ Do not let water get on the printer mechanism or electronic components.
❏ Do not use a hard or abrasive brush to clean the printer.
❏ Do not spray the inside of the printer with lubricants; unsuitable oils can
damage the mechanism. Contact your dealer or a qualified service person
if lubrication is needed. See "Where To Get Help" on page 229.
1. Make sure the printer is turned off and all the lights are off, and then unplug
the power cord. Let the printer sit for a minute.
c
Caution:
Do not touch the following parts; otherwise, printouts may be soiled.
2. Open the top cover and then use a soft, clean cloth to carefully remove any
dust or dirt inside the printer. Wipe the gray area shown below in the
direction of the arrows.
If there is a excessive dirt on the inside of the printer, clean it using a soft,
clean cloth dampened with mild detergent. Then, wipe the inside of the
printer dry with a dry, soft cloth.