User guide
Table Of Contents
- Front
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Projector Placement
- Installing the Projector Feet
- Removing and Attaching the Cable Cover
- Projector Connections
- Installing Batteries in the Remote Control
- Installing Batteries in the Pens
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Setting Up Projector Network E-Mail Alerts
- Setting Up Monitoring Using SNMP
- Controlling a Networked Projector Using a Web Browser
- Crestron RoomView Support
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Image Shape
- Resizing the Image with the Wide and Tele Buttons
- Adjusting the Image Position
- Focusing the Image
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Controlling the Volume with the Volume Buttons
- Projecting a Slide Show
- Adjusting Projector Features
- Using the Interactive Pens
- Using the Pens
- Using BrightLink With a Computer
- Easy Interactive Tools
- Easy Interactive Tools System Requirements
- Installing Easy Interactive Tools
- Starting and Exiting Easy Interactive Tools
- Using the Easy Interactive Tools for Interactive Mode
- Using Easy Interactive Annotation Tools
- Using the Easy Interactive Tools for Whiteboard Mode
- Using Easy Interactive Tools for Saving, Printing, and More
- Windows Tablet PC and Ink Tools
- Using BrightLink Without a Computer
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Using the Projector Help Displays
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When Image is Incorrect Using the USB Display Function
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When There is No Sound or Low Volume
- Solutions to Microphone Problems
- Solving Projector or Remote Control Operation Problems
- Solving Interactive Pen Problems
- Solutions When "Hardware Device Not Found" Message Appears
- Solutions When "Error Occurred in the Easy Interactive Function" Message Appears
- Solutions When the Interactive Pens Do Not Work
- Solutions When Manual Calibration is Difficult
- Solutions When the Built-In Toolbar Does Not Work
- Solutions When the Interactive Pen Position Is Not Accurate
- Solutions When the Interactive Pens Are Slow or Difficult to Use
- Solutions When the Interactive Pens Cause Interference or Unwanted Effects
- Solutions When Network Alert E-Mails are Not Received
- Where to Get Help
- Technical Specifications
- General Projector Specifications
- Projector Lamp Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Supported Video Display Formats
- USB Display System Requirements
- Notices
current screen with annotations in interactive mode, or all the pages in the current session in whiteboard
mode.
You can also select other locations and formats for saving your files, as described here. If you save as
PDF, for example, all your whiteboard pages are combined in one file.
1. Select the Keyboard tool.
The on-screen keyboard is displayed.
2. Select the Other tools icon.
You see additional tools.
3. Select the Settings tool.
The Settings window opens.
4. Select the Save Settings tab.
You see a screen like the following:
137