Specifications

ManualsBrandsEpson ManualsPrinters480SX

EPSON Stylus COLOR 480SX

6/00 EPSON Stylus COLOR 480SX

- 9

Then enter the number of the best pattern for each row in

the corresponding boxes on the screen and click

Finish.

If there isn’t a precisely aligned pattern, enter the number of

the best aligned patterns in each row and click

Realignment. Another alignment page prints with your

selections printed as patterns numbered 8. Repeat step 4 to

select a more precise pattern for each row.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year. Follow these steps:

1. Unplug the printer’s power cord and disconnect the printer

cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer’s interior with a soft, damp

cloth.

Don’t touch the gears inside the printer.

Never use a hard or abrasive brush, or alcohol or thinner

for cleaning; they can damage the printer components

and case.

Don’t get water on the printer components and don’t

spray lubricants or oils inside the printer.

Don’t use any cleaning sheets included with special

media; they may jam inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or one of a similar size.

Follow these steps:

To avoid damage, always leave the ink cartridges

installed when transporting the printer. Be sure to

remove the tape used in step 4 after installing the printer

in its new location.

1. Plug in the printer, wait until the print head locks in the far

right position, then unplug the printer.

2. Disconnect the printer cable from the printer.

3. Remove any paper from

the printer and remove

the paper support.

4. Open the printer cover.

Secure the ink cartridge

holder to the printer with

tape as shown, then close

the printer cover.

5. Repack the printer and

attachments in the original box using the protective

materials that came with it.

Be sure to keep the printer level as you transport it. After

transporting the printer, remove the tape securing the print

head and then print a document to test the output.