User`s guide

Endosafe

- Portable Test System User’s Guide

PIPTS101-10

x Dimensions: 9.25” x 4.625” x 2.50” corresponding 235 mm (D) x 128 mm (W) x

65 mm (H)

x Power supply unit: 100-240 V, 50-60 Hertz

x Power supply on board: 12 V DC, 5A

x Battery life: 6 - 8 hours of operation post-charge

x Warm-up time: Approximately 5 -10 minutes from 20º C start

x Display: Two (2) lines of sixteen (16) characters each

x Environmental Conditions:

¾ Operating Temperature 15º to 27 º C

¾ Humidity 5% to 95% noncondensing

¾ Indoor and outdoor use

¾ Altitude - unlimited

x Weight: 3 lbs. corresponding 1100 Gram (without power supply unit)

Endosafe

- PTS Cartridge Specifications

x Reference package insert for storage requirements

x Endotoxin Sensitivity: 10-0.1 EU/mL range, 5-0.05 EU/mL range, 1-0.01 EU/mL

range, 0.5-0.005 EU/mL range (see Appendix A)

x Rapid Micro Methods – Gram ID: Archived parameters for Gram-negative, Gram-

positive and Yeast/Mold isolate identification (see Appendix B)

x Inhibition/Enhancement Screening (see Appendix C)

x Rapid Micro Methods – Glucan (see Appendix D)

x Acceptable temperature: 37º C +

1º C

Sample requirement: 25 L sample per channel

NOTE: Sample must be delivered to each sample port without contamination or cross

contamination between samples.