User guide

Assigning a name to the printer

Use the following procedure to assign a name:

1. Double-click the

Epson Namer

icon.

The EPSON Namer utility should be located on your hard

drive if you installed it. If you have not installed it, insert

the Printer Software for EPSON Stylus COLOR 800

CD-ROM into your computer’s CD-ROM drive and open

the utility from there. (If you use the floppy disk version,

insert it in a disk drive and open the utility from there.)

2. Click the

EPSON Stylus(AT)

icon in the Device Types window.

3. If there are multiple AppleTalk zones at your site, select the

zone where the printer is located.

4. Under New Name, enter a name for your printer. You should

assign a name that clearly distinguishes your printer from

others on the network.

5. Click

Rename

and then click

Done

to quit the EPSON

Namer.

Using the Chooser to select your printer

After you install the printer software, you need to open the

Chooser to select your printer. You have to choose the printer

only the first time you use it or whenever you want to switch to

another printer. Your Macintosh will always print using the

last printer selected.

Easter2 Ref. Guide

Rev.b

A5 size Chapter 2

05-28-97 DR, pass 3

2-28

Getting Started