User guide

The factory default settings are designed to meet the needs of most users,
so you may not need to change them. The table below lists the features
you can select in the default-setting mode.
Settings Options
Print direction Auto, Bi-D, Uni-D
Font Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
Pitch 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode Auto, Parallel, Serial, Option
Auto I/F wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM X24E
Auto CR (IBM mode
only)
Off, On
AGM (IBM mode only) Off, On
Character table PC437, PC850, PC860, PC861, PC863, PC865,
Abicomp, BRASCII, Roman 8,
ISO Latin 1, Italic U.S.A., Italic France,
Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Auto line feed Off, On
Network I/F mode Off, On
Loading position 8.5 mm, 3 mm, Others
Economy Off, On
Parallel I/F transfer rate Fast, Normal
For more details, see the next section, “Using the default settings.” To
change a setting, see “Changing the default settings” on page A-7.
Note:
Most software controls the character table and auto line feed. If your software
controls these features, you may never need to set them with the control panel.
A
R
Easter2 Ref. Guide
Rev.b
A5 size Appendix A
05-28-97 DR, pass 0
Using the Printer with DOS
A-3