User guide

S/MM configurations (continued)

BANK 0

BANK 1

Total memory

16MB

32MB

48MB

32MB

1MB

33MB

32MB 2MB 34MB

32MB

4MB 36MB

32MB

8MB 40MB

32MB

16MB

48MB

32MB

64MB

Use only tin-plated, 32-bit or 36-bit, 72-pin, fast-page mode

SIMMs that operate at an access speed of 80ns (nanoseconds)

or faster. Be sure all the SIMMs operate at the same speed.

SIMMs that are 80ns must operate with 1 wait state; 70ns or

faster SIMMs can operate with 0 wait state. (To add a wait state,

select

the

DRAM

wait

state option from

the Advanced

Chipset Control

option in SETUP.)

Inserting SIMMs

Make sure the computer is turned off and then follow these

steps to install SIMMs:

Make sure the front of the computer is facing you.

Refer to the illustration on page 4-5 to locate

the

SIMM

sockets on the right side of the system board.

Remove any option cards that may be blocking your access

to the SIMM sockets. (See page 4-18 for instructions.)

installing and Removing Options

4-11