Quick Setup Guide

ManualsBrandsEpson ManualsMicrophones3LCD

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User’s Guide on your projector CD.

Connect the projector

Before you can connect to the projector, you need to loosen the screws and

remove the cable cover.

Computer

Choose from the following connections:

USB port

Connect the square end of a USB cable to the projector’s USB-B

(square) port. Connect the flat end of the cable to any USB port on your

computer.

Windows

2000 SP4 or later: After turning on the projector, follow

the on-screen instructions to install the EPSON

USB Display software

(EMP_UDSE.EXE; only on first connection).

Note: If the software screen does not display automatically, open My

Computer or Computer, then double-click EPSON_PJ_UD.

Mac OS

X 10.5.1 or higher: After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the EPSON USB Display software

(only on first connection).

Monitor port

Connect one end of a VGA cable to the projector’s Computer1 or

Computer2 port, and the other end to your computer’s

monitor port. If

you are using a laptop, switch it to external display (see “Troubleshooting”).

You can also connect an audio cable.

HDMI port

Connect one end of an HDMI cable to the projector’s HDMI port and the other

end to an HDMI port on your computer.

External monitor and speakers

You can also connect an external monitor and external speakers to your

projector to enhance your presentations. See the User’s Guide on your

projector CD for details.

Network (LAN)

Connect the projector to your network using an Ethernet

cable. See “Project

over a wired network” for more information.

Note: To connect to a wireless network, you must install the optional EPSON

wireless LAN module. For more information, see your User’s Guide on your

projector CD.

Microphone

Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video device

Connect up to 5 video devices and use the Source Search button on the

projector or remote control to switch between them. For more information on

playing sound through the projector, see the User’s Guide on your projector CD.

RCA video cable

(composite video)

S-Video

cable

Component video

to VGA cable

Audio cable

HDMI cable

Camera, USB device, or

EPSON DC-06 document camera

Connect a camera or document camera to the projector’s

USB-A (flat) USB port.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which

source to display

Turn projector

on and off

Access projector

menus

Turn off projector

display and sound

Get solutions to

common problems

Navigate projector

menus

Change presentation

slides (USB only)

Control projector

volume

You can use the remote control to operate the projector. With the USB cable,

you can use the remote as a wireless mouse. For more information on using the

remote control, see your User’s Guide on your projector CD.

Turn on your equipment

Turn on your computer or video source.

Make sure the power cord is connected and plugged into an

electrical outlet.

Power light

Press the power button on the projector or remote control.

The

power light flashes green, then stays on.

Note: To shut down the projector, press the power button twice.

If you don’t see an image, press the Source Search button on the

remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

If you need to focus the image, first slide the switch to open the air filter

cover on the side of the projector. Then raise or lower the focus lever to

sharpen the image.

The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select

Extended and press . Select Language and press . Select your

language and press . Press the Menu button to exit the menu system.

Project over a wired

network

If you need to configure the projector for your network, see “Network

Configuration” on the back of this sheet.

Press the LAN button on the remote control. You see this screen.

Start EasyMP

Network Projection on your computer.

Windows: Select or Start > Programs or All Programs > EPSON

Projector > EasyMP Network Projection.

Mac OS X: Double-click the EasyMP Network Projection icon in the

Applications folder.

Select Advanced Connection Mode and click OK.

Select the projector you want to connect to, then click Connect.

If you don’t see the projector you want, click the Automatic search

button.

PowerLite

470/475W/480/485W

*412215800*

4122158 Rev.0

1-F C

4122158 Rev.0

1-F M

4122158 Rev.0

1-F Y

4122158 Rev.0

1-F K

Summary of content (4 pages)

PAGE 1
PowerLite® 470/475W/480/485W Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Network (LAN) Using the remote control Connect the projector to your network using an Ethernet® cable. See “Project over a wired network” for more information. Make sure the batteries are installed as shown (two AA batteries). 5 If you need to focus the image, first slide the switch to open the air filter cover on the side of the projector.
PAGE 2
PowerLite® 470/475W/480/485W Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Network (LAN) Using the remote control Connect the projector to your network using an Ethernet® cable. See “Project over a wired network” for more information. Make sure the batteries are installed as shown (two AA batteries). 5 If you need to focus the image, first slide the switch to open the air filter cover on the side of the projector.
PAGE 3
5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. 5 Do one of the following: • Your computer image is projected, with a floating toolbar: • When you’re done presenting, click Disconnect on the toolbar. Note: To project wirelessly, you need the optional Wireless LAN module. To purchase the EPSON Wireless LAN module or other accessories, see “Optional accessories” on the right.
PAGE 4
5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. 5 Do one of the following: • Your computer image is projected, with a floating toolbar: • When you’re done presenting, click Disconnect on the toolbar. Note: To project wirelessly, you need the optional Wireless LAN module. To purchase the EPSON Wireless LAN module or other accessories, see “Optional accessories” on the right.