Color Digital Camera Color Digital Camera User's Guide User's Guide User's Guide 4014069 -00
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COVER.FM Pass 3 Where to Find Information This User’s Guide Provides detailed information to help you set up and use your EPSON PhotoPC 3100Z and the optional products available from EPSON. Also contains information on troubleshooting, and instructions on installing the software included on the EPSON PhotoPC 3100Z Software CD-ROM included with your PhotoPC 3100Z.
R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 ® COLOR DIGITAL CAMERA User’s Guide FRONT.
L R4C7850 Rev. C A5 size 4/27/01 FRONT.FM Pass 3 IMPORTANT NOTICE All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 PPC3100Z.TOC Pass 3 Contents Introduction PhotoPC 3100Z Features . . . . . . . . . . . . . . . . . . . . . . . . . Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For United Kingdom users - use of options . . . . Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When using the camera . . . . . . . . . . . . . . . . . . . . .
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.TOC Pass 3 Taking Multiple Exposures . . . . . . . . . . . . . . . . . . . . . . .2-13 Recording video clips . . . . . . . . . . . . . . . . . . . . . . .2-13 Using the continuous shooting feature. . . . . . . . .2-15 Using the time lapse feature. . . . . . . . . . . . . . . . . .2-15 Using the stitch assist feature. . . . . . . . . . . . . . . . .2-17 Making Audio Recordings for Photos . . . . . . . . . . . . . .
A5 size 4/27/01 Chapter 5 Using Images on Your Computer System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . For Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Included Software. . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the Software for Windows Users . . . . . . . . . Installing the Software for Macintosh Users . . . . . . . .
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.TOC Pass 3 Appendix A Specifications Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 Physical dimensions . . . . . . . . . . . . . . . . . . . . . . . .A-1 Product type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 Recorded image . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2 Optical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-3 Functional . . . . . . . . . . .
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 INTRO.FM Pass 3 Introduction Your EPSON® PhotoPC™ 3100Z is a revolutionary, easy-to-use digital camera that enables you to take full-color pictures that you can edit, manipulate, and print using your computer. Create professional letters, documents, and presentations from your desktop using stunning, lifelike images. Share photos with business colleagues or friends over the Internet.
L R4C7850 Rev. C A5 size 4/27/01 2 INTRO.FM Pass 3 ❏ Continuous shooting of up to 47 pictures (approximately) ❏ Automatic, predefined, or manual white balance adjustment ❏ Automatic, predefined and adjustable exposure settings (-2.0 to + 2.0 EV, in increments of 0.5 or 0.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley ❏ ❏ AC Adapter (B867081, B867091, B867101, B867111, B867121, B867131, B867141, B867151, B867161, B867171) for use with a standard electrical outlet Power Pack (B81817✽, B818181, B818182) which includes: R R4C7850 Rev. C A5 size 4/27/01 INTRO.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley INTRO.FM Pass 3 Safety Instructions Read all of these instructions before using the camera, and keep them handy for later reference. Follow all warnings and instructions marked on the camera and options. ❏ Do not use the camera outdoors during a thunderstorm. ❏ If the camera or option emits unusual noises, odors, or smoke, cancel the current operation and turn the device off immediately.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley ❏ Never adjust controls that are not mentioned in the operating instructions. ❏ Do not touch your camera’s flash with your fingers, or any other object, or allow the flash to become dirty. Using the camera under any of these conditions can damage the flash. If you accidentally touch the flash, or if it becomes dirty, be sure to clean it with a soft, dry cloth before using the camera.
L R4C7850 Rev. C A5 size 4/27/01 6 INTRO.FM Pass 3 ❏ Be aware of electrical shock hazard. ❏ Do not handle the batteries with wet hands or use them near water. ❏ Do not expose the batteries to water or high humidity. ❏ Keep batteries away from heat sources. ❏ Do not drop, puncture, disassemble, mutilate, or short-circuit batteries. Do not place the batteries near to or into fire or water. ❏ To protect against short-circuiting, do not remove the outside sleeves of the batteries.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Safety information for United Kingdom users w R R4C7850 Rev. C A5 size 4/27/01 INTRO.FM Pass 3 Warnings, Cautions, and Notes Warning: This appliance must be earthed. Refer to the rating plate for voltage and check that the appliance voltage corresponds to the supply voltage. w Warnings must be followed carefully to avoid bodily injury.
L R4C7850 Rev. C A5 size 4/27/01 8 Introduction INTRO.FM Pass 3 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 START.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley START.FM Pass 3 Unpacking Your PhotoPC 3100Z Camera Parts Make sure that your camera box contains all of the items shown below. After unpacking your PhotoPC 3100Z, take a few minutes to learn about the components shown below.
A5 size 4/27/01 Back view viewfinder R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley START.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley START.FM Pass 3 Display panel sensitivity (see page 4-8) Indicator lights image quality (see page 4-1) white balance (see page 4-9) low battery icon (see page 1-6) flash (see page 4-4) red-eye reduction (see page 4-4) The camera has one red and one green indicator light beside the viewfinder. They turn on or blink to guide you through the picture-taking process, or to indicate the camera status.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Using the Batteries Your PhotoPC 3100Z comes with four AA (IEC LR6) alkaline batteries. See the following sections for details on installing, replacing, cleaning, storing, and disposing of the batteries. c Caution: Do not use manganese batteries (IEC R6). R R4C7850 Rev. C A5 size 4/27/01 1. START.FM Pass 3 Turn the camera upside down with the lens facing you.
L R4C7850 Rev. C A5 size 4/27/01 2. START.FM Pass 3 Insert four batteries into the compartment, positioning the and ends as shown below. Then lower the battery cover. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley When the battery power is almost out, a low battery icon appears on the display panel. When the battery power runs out, this icon blinks and the camera turns off automatically. Remove the old batteries, then insert new ones.
When the low battery icon listed below are unavailable. A5 size 4/27/01 appears, the buttons When playing back photos and audio recordings: Delete SOUND VIDEO CLIP When making settings: (language and signal system selection) Memory SETUP MEMORY CARD FORMAT Note: ❏ Battery life varies depending on the battery type and the manufacturer. ❏ ❏ R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
L R4C7850 Rev. C A5 size 4/27/01 START.FM Pass 3 Keep the battery ends clean by wiping them with a dry cloth. w 1-8 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Warning: ❏ Do not apply heat or force to batteries, and do not disassemble, drop, short-circuit, or put batteries into contact with fire or water. Storing the batteries If you do not plan to use the camera for a long period of time, remove the batteries and store them in a dry location at a low temperature.
A5 size 4/27/01 Disposing of the batteries Before disposing of batteries, make sure you discharge them completely. w Warning: ❏ Be sure to securely cover the + end of each battery with tape when disposing of them to prevent combustion or an explosion. ❏ R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Dispose of used batteries according to the manufacturer’s instructions and in compliance with all applicable laws.
L R4C7850 Rev. C A5 size 4/27/01 2. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley START.FM Pass 3 Tighten the screw sleeve on the fastener as shown below to close it. screw shut to secure Attaching the lens cap to your camera After you have attached the camera strap, you can attach the lens cap to your camera using the lens caps string. To attach the string to the lens cap and then to the camera, follow these steps. 1. 1-10 3.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley 2. Pass the end of the string with the larger loop through the camera strap’s triangular fastener as shown below. R R4C7850 Rev. C A5 size 4/27/01 START.FM Pass 3 Installing and removing a CompactFlash Card You cannot take photos unless a CompactFlash Card is installed in your camera. Your camera comes with the memory card already installed. If you need to install or remove the memory card, follow these steps. 3.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley START.FM Pass 3 To remove the card, push in the eject button below the memory card slot. Then, remove the card and close the cover. Turning on your camera for the first time The first time you turn on your camera, you must select the default language for messages displayed on the LCD monitor and set the date and time before you can use the camera to take pictures. See the sections below.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Setting the date and time The first time you turn on the camera, after setting the language you must set the date (month, day, and year) and time (hours and minutes). Once these settings are made, the camera automatically records the date and time that each image is taken. Follow the steps below to set the clock using the LCD monitor. 1.
L R4C7850 Rev. C A5 size 4/27/01 1-14 START.FM Pass 3 Getting Started Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 PICTURES.FM Pass 3 Chapter 2 Taking Pictures Using the PhotoPC 3100Z to take pictures is similar to using a traditional “point and shoot” camera. This chapter explains the procedures for taking photos with the camera and covers the following topics.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 Your camera’s picture-taking and flash range The camera should be held at least 50 centimeters away from the subject when composing a shot through the viewfinder, unless you are using the macro setting. Turning the camera on and off Before turning the camera on, be sure to remove the lens cap from the camera.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Using the display panel The large number in the lower right corner of the display panel shows the approximate number of remaining pictures that you can take. This number is affected by the image quality setting. When you adjust the image quality, the number of remaining pictures is altered accordingly.
L R4C7850 Rev. C A5 size 4/27/01 PICTURES.FM Pass 3 Using the dial switch The camera’s dial switch has six different positions which determine how the camera works. This section gives an overview of each dial position. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Other dial positions To perform other camera operations, turn the dial switch so that one of the following icons is selected. For playing back and managing photos, audio recordings, and video clips.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Making basic settings The three small buttons on the top of the camera allow you to easily make some basic settings. You can use these buttons when the dial switch is set to one of the red icons. The buttons are described below. Changes the image quality setting. See “Adjusting the image quality” on page 4-1 for details. Changes the flash setting. See “Setting the flash” on page 4-4 for details. Turns the self timer on and off.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 Note: ❏ Hold the camera firmly with both hands and keep it still for a few moments after you press the shutter button. Taking Pictures Using the Viewfinder Using the viewfinder instead of the LCD monitor to take pictures saves battery power and helps you hold the camera steady while pressing the shutter button. Follow the steps below. 1.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley 5. Hold the camera still until the green indicator light beside the viewfinder comes back on, or until the camera makes a clicking sound. Then release the shutter button. After you take a picture, the green indicator light blinks. This signals that the image has been captured and the camera is processing it. When the light stops blinking, the image is saved.
L R4C7850 Rev. C A5 size 4/27/01 PICTURES.FM Pass 3 When using the zoom feature in the or dial position, the following zoom indicator appears at the top of the LCD monitor. yellow slider Using the self timer Turning on the self timer creates a 10-second delay between the time you press the shutter button and the moment the image is captured, allowing you include yourself in photographs. The timer icon appears on the display panel when you turn on the timer. Follow the steps below.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Note: ❏ To stop the self timer after pressing the shutter button, press the shutter button again, or press the timer button. ❏ You can use the self timer when taking photos using the continuous shooting feature. The camera takes up to approximately 47 pictures in sequence, beginning ten seconds after you press the shutter button. To turn continuous shooting on, see “Using the continuous shooting feature” on page 2-15. R R4C7850 Rev.
L R4C7850 Rev. C A5 size 4/27/01 PICTURES.FM Pass 3 Note: ❏ Hold the camera firmly with both hands and keep it still for a few moments after you press the shutter button. ❏ 2. 4. Hold the shutter button halfway down to lock the auto focus. A small green circle appears in the upper-right corner of the monitor. If you wish, you can now reposition the camera, so that your subject is off-center, without losing focus. Depress the shutter button completely to take the photo.
A5 size 4/27/01 When a preview image is being displayed To use the basic playback feature when the LCD monitor is displaying a preview image, follow the steps below. 1. 2. Remove the lens cap, set the dial switch to and turn on the camera. A preview image is displayed on the LCD monitor. When the camera is in Manual mode, press the MENU CHANGE button. When the camera is in Program mode or Full Auto mode, go on to step 3.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 4. Turn the dial switch to and take a picture. 5. After the camera processes the photo, the icon appears briefly next to the top-right LCD monitor button. Press this button while the icon is displayed to playback your photos. To delete the photo you just took, press the Delete button.
A5 size 4/27/01 Using the macro setting to take close-ups Note: You may need to be more than 6 centimeters away from the subject when using the optical zoom feature. See “Using the optical zoom feature” on page 2-7 for details. Follow the steps below to use the macro feature. 2. Remove the lens cap, set the dial switch to turn on the camera. , and Press the button once. A green frame appears around the previewed image and MACRO is displayed briefly at the center of the monitor.
L R4C7850 Rev. C A5 size 4/27/01 1. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 Remove the lens cap, set the dial switch to , and press the POWER button to turn on the camera. VIDEO CLIP appears at the top of the LCD monitor, a white frame appears around the previewed image, and the total available amount of recording time is displayed at the upper-left corner of the LCD monitor.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Using the continuous shooting feature You can use the continuous shooting feature to break down a complex motion into photos containing a series of easy-to-see steps. You can also use it to take a number of consecutive pictures and then choose the ones that you like best. When the image quality is set to Standard, you can take almost two photos per second, up to approximately 47 photos.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 Note: ❏ The settings that you make in the dial position remain when you use the time lapse feature. To change these settings, turn the dial switch to and make the appropriate settings before using the time lapse feature. ❏ You cannot take TIFF files when using the time lapse feature. 1. Secure the camera on a flat surface or tripod. 2.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Using the stitch assist feature You can use the PhotoPC 3100Z’s stitch assist feature to help take a series of overlapping pictures that can be easily combined into a panorama image with the EPSON Panorama Boutique Light EP included on your CD-ROM. R R4C7850 Rev. C A5 size 4/27/01 PICTURES.
L R4C7850 Rev. C A5 size 4/27/01 4. PICTURES.FM Pass 3 The right side of the previously taken photo displays on the left of the LCD monitor. Align this section with the left side of the image currently displayed on the LCD monitor so the images overlap, and then take the photo. If you press the upper right button where the number and left arrow are displayed, the previously taken photo is displayed. If you press the Delete button at this screen, the photo will be deleted.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 4. The bottom section of the previously taken photo displays on the top of the LCD monitor. Align this section with the top of the image currently displayed on the LCD monitor so the images overlap, and take the picture. The left side of the previously taken photo displays on the right of the LCD monitor.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PICTURES.FM Pass 3 ❏ Recording audio immediately after taking photos To make audio recordings immediately after taking photos, you must first make a few settings. Follow these steps. 1. Remove the lens cap, set the dial switch to and turn on the camera. 2. Press the Shot SETUP button on the back of the camera. 3. Press the Confirmation button to select On. 4. Turn the dial switch to .
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Recording audio for existing photos To make audio recordings for previously taken photos, follow these steps. Note: You cannot make an audio recording for existing video clips. 1. Set the dial switch to , then turn on the camera. 2. Press the arrow icon buttons to select the image to which you want to attach an audio recording.
L R4C7850 Rev. C A5 size 4/27/01 PICTURES.FM Pass 3 Note: To adjust the speaker volume, see “Adjusting the speaker volume” on page 4-21. 2-22 Taking Pictures Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 PLAYBACK.FM Pass 3 Chapter 3 Playing Back and Managing Images With Your Camera This chapter explains how to view photos on your camera’s LCD monitor, or a television set. It also includes explanations for locking and erasing photos, and for displaying photo information using the controls on your camera. This chapter covers the following topics.
L R4C7850 Rev. C A5 size 4/27/01 1. PLAYBACK.FM Pass 3 Set the dial switch to , then turn on the camera. A photo is displayed on the LCD monitor. Note: No Images is displayed when there are no photos saved on the camera’s memory card. 2. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley To display four photos at a time, press the Multi button once.
A5 size 4/27/01 Press the W button to decrease the level of magnification. 3. 4. Scroll the screen up, down, right, or left using the arrow icon buttons. You can scroll quickly through the screen by holding down any one of the arrow icon buttons. 4. Press the BACK button to exit the magnification screen. To rotate the photo 90 degrees to the left from its original orientation, press the Rotate button once. Press it again to rotate the photo 90 degrees to the right from its original orientation.
L R4C7850 Rev. C A5 size 4/27/01 6. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PLAYBACK.FM Pass 3 Press the Restart button to continue viewing the slide show. Exposure Adjustment: +2.0 to -2.0 To cancel the slide show before it is finished, press the Quit button, then press the BACK button twice. Flash: ON or OFF An icon indicates the flash setting that was used when the photo was taken.
A5 size 4/27/01 Selecting a folder in the CompactFlash Card 2. If there is more than one folder on your CompactFlash Card that your PhotoPC 3100Z can access, you can change the folder that your camera accesses. To change the folder, follow these steps. 1. Set the dial switch to , then press the POWER button to turn on the camera. 2. Press Memory SETUP. The name of the folder currently being used appears on the right side of the LCD monitor, between the up and down arrow icons. 3.
L R4C7850 Rev. C A5 size 4/27/01 PLAYBACK.FM Pass 3 To play the clip in reverse, from the last frame to the first, press the Fwd button. The last frame of the video clip is displayed and Fwd changes to Rev. Then, press the Play button. To play the clip in slow motion, press the Change Speed button during playback. 5. To pause the clip during playback, press the Pause button. To move forward through the clip one frame at a time while the clip is paused, press the Fwd button.
A5 size 4/27/01 To unlock a locked photo, press the Unlock button. The lock icon is removed from the upperleft corner of the photo. 4. To lock or unlock other photos, repeat steps 2 and 3. Erasing images You can erase one photo, several photos, or all of the photos at once using the LCD monitor. Erasing individual photos To erase photos saved in your memory card one at a time, follow the steps below. 1. Set the dial switch to 2.
L R4C7850 Rev. C A5 size 4/27/01 PLAYBACK.FM Pass 3 Note: To make audio recordings, see “Making Audio Recordings for Photos” on page 2-19. 1. Set the dial switch to , then turn on the camera. 2. Use the arrow icon buttons to select a photo with an attached audio recording that you want to erase (a microphone icon is displayed in each photo that has an attached recording). 3. Press the MENU CHANGE button. 4. Press the SOUND button. 5.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Viewing Pictures on a Television R R4C7850 Rev. C A5 size 4/27/01 2. PLAYBACK.FM Pass 3 Open the connector cover on the side of the camera. You can display images and play back audio recordings saved on the camera’s memory card on a regular television simply by connecting the camera to the television using the AV cable that came with your PhotoPC 3100Z. Note: Television telecasting specifications vary by country.
L R4C7850 Rev. C A5 size 4/27/01 4. PLAYBACK.FM Pass 3 Connect the other end of the AV cable to the audio and video input ports on the television. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley You can use all of the operations and procedures for viewing or managing images on the LCD monitor to view or manage images on the television. For more information on viewing the images, see “Viewing Images Using the LCD Monitor” on page 3-1.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 MAKESET.FM Pass 3 Chapter 4 Making Settings You can make a variety of settings for your PhotoPC 3100Z. The available settings depend on the camera’s dial switch position. This chapter explains how to make the following settings.
L R4C7850 Rev. C A5 size 4/27/01 MAKESET.FM Pass 3 Making basic image quality adjustments While your PhotoPC 3100Z’s dial switch is set to , , or , you can cycle through the image quality settings by pressing the image quality button on the top of the camera. The currently selected image quality setting is displayed on the display panel. You can toggle freely between these settings, and take and save pictures with various quality settings on the same CompactFlash Card.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley HyPict When these icons are shown on the display panel, you can take HyPict or TIFF photos. HyPict images are captured at 2544 × 1904 pixels. These pictures have even higher detail than super fine images, and the included 16 MB CompactFlash Card stores approximately 12 HyPict photos without audio recordings. For information on TIFF photos, see “Taking photos in the TIFF file format” on page 4-4.
L R4C7850 Rev. C A5 size 4/27/01 4. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Press the Back button. Note: Selecting JPEG allows you to take photos using the HyPict image quality setting, instead of the TIFF file format. Taking photos in the TIFF file format In addition to the four basic image quality settings, your PhotoPC 3100Z allows you to take uncompressed images in the TIFF file format.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Turn on the camera and press the flash button on the top of the camera to cycle through the flash settings. The settings appear on the display panel as shown below. Automatic (default setting) Red-eye reduction Forced flash Flash off Slow synchro (Program and Manual modes only) The flash settings are as follows: Automatic The flash fires automatically whenever more lighting is needed. MAKESET.
L R4C7850 Rev. C A5 size 4/27/01 MAKESET.FM Pass 3 Note: ❏ After turning on the camera and taking a flash photo, the flash icon and the green indicator light beside the viewfinder blink until the flash is fully recharged. Choosing a camera mode Choose from the camera modes described below. Full Auto Allows you to take photos without having to make complex settings. The available settings include: ❏ When you use the external flash, the internal flash is disabled and the flash button does not work.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 MAKESET.FM Pass 3 ❏ Sensitivity ❏ Predefined exposure To change the camera mode, follow these steps. ❏ Fine exposure adjustment (in increments of 0.5 EV) 1. ❏ Auto, custom, or fixed white balance Set the dial switch to and turn on the camera. The current camera mode is displayed at the right side of the LCD monitor, below the date and time settings. 2.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Making manual focus settings When in the Manual camera mode, you can make focus settings manually. Follow these steps. 1. Make sure that Manual is selected as the camera mode. (See “Making camera mode settings” on page 4-6.) 2. Remove the lens cap, set the dial switch to turn on the camera. , and Note: You cannot make manual focus settings when taking pictures using the viewfinder. 3.
A5 size 4/27/01 When to adjust the sensitivity 3. Set the sensitivity to high or super high when taking photos in the following situations: If the subject is fast moving (useful for indoor sports) ❏ If the subject is far away when using a flash ❏ If it is dark and you are not using a flash (useful when flash photography is prohibited) EPSON recommends setting the sensitivity to standard at all other times, as image quality is lower when using higher sensitivity settings.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 For example, make FIX the white balance setting when taking pictures at dusk to increase the reddish color tones in your images. However, keep the white balance set to AUTO when taking pictures under white light to avoid a green tone in your images. 3. In the Program camera mode, press the W/B button to toggle between AUTO, FIX and CUSTOM.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley 4. Place a white sheet in front of the camera lens so that it fills the entire LCD monitor. Note: ❏ You can also use a colored sheet. For example, to create a sepia hue, use a blue sheet. To create a blue hue, use a yellow sheet. Experiment with other colors for different effects. ❏ 5. To quit without making a custom white balance setting, press BACK. Press the shutter button to make the new setting.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Decrease the exposure setting when: 3. ❏ You want to make your photos darker. ❏ You are taking pictures of a black object which may tend to look grayish in photos. ❏ You are taking pictures of an object with a black background. How to make basic exposure adjustments Follow the steps below to change the exposure setting. 1. 2.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Making predefined exposure settings The PhotoPC 3100Z has four predefined exposure settings available when the Program camera mode is selected. A5 size 4/27/01 Auto exposure ❏ Divided brightness metering system Sports For photographing fast-moving subjects.
L R4C7850 Rev. C A5 size 4/27/01 3. MAKESET.FM Pass 3 Press the Program button to toggle between Normal, Sports, Portrait, or Landscape. Making advanced exposure adjustments When the Manual camera mode is selected, you can manually set the correct exposure by changing the shutter speed and the aperture. Select Auto Exposure, Aperture Priority, Shutter Priority or Manual Exposure as the exposure mode.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R4C7850 Rev. C Aperture priority Shutter priority A5 size 4/27/01 Aperture priority allows you to select the aperture first, so that the camera automatically adjusts the shutter speed for the correct exposure. Select the aperture priority feature as follows. R MAKESET.FM Pass 3 Shutter priority allows you to select the shutter speed first, so that the camera automatically adjusts the aperture for the correct exposure.
L R4C7850 Rev. C A5 size 4/27/01 MAKESET.FM Pass 3 Manual exposure Manual exposure allows you to manually adjust the shutter speed and the aperture to set the exposure. Make the manual exposure setting as follows. Note: You cannot make manual exposure settings when taking pictures with the viewfinder. 1. Make sure that Manual is selected as the camera mode. See “Making camera mode settings” on page 4-6 for details. 2. Remove the lens cap, turn on the camera, and set the dial switch to . 3. 4.
A5 size 4/27/01 Follow the steps below to change the metering system. 1. Make sure that Manual is selected as the camera mode. See “Making camera mode settings” on page 4-6 for details. 2. Remove the lens cap, set the dial switch to , then turn on the camera. or If the dial switch is set to , press the MENU ON/OFF button on the back of the camera to turn on the LCD monitor. Press the MENU CHANGE button. 4. To change the metering system, press the Metering button. MAKESET.
L R4C7850 Rev. C A5 size 4/27/01 6. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Make sure that slow synchro is selected as the flash setting. Press the flash button on the top of the camera until the slow synchro icon appears on the display panel on the top of the camera. Note: When using the external flash, the internal flash setting is disabled and the button does not work.
A5 size 4/27/01 2. Set the dial switch to 3. Press the Shot SETUP button. 4. Leading or Trailing appears at the right side of the LCD monitor. Press the button next to this setting until Ext Flash is displayed. 5. R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley and turn on the camera. Setting the time and date Follow the instructions in this section to set the time and date. 1. Set the dial switch to 2.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Note: ❏ You must reset the time if the camera is unplugged and the batteries are removed for more than one week. 2. Press the Camera SETUP button. The current setting appears at the top-right corner of the LCD monitor. ❏ 3. Press the Power Save button. You can select 30 seconds, 1 minute, or 5 minutes as the interval. 4. Press BACK to save your setting.
4. R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Press the BACK button to return to the previous screen. Adjusting the speaker volume Follow these steps to adjust the volume of the built-in speaker. 1. Set the dial switch to and turn on the camera. 2. Press the Camera SETUP button. 3. Press the Volume button to adjust the speaker volume level. 4. Press BACK to return to the previous screen.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 3. Press the arrow icon buttons to move the cursor to the language of your choice. 4. Press the TV button to select NTSC or PAL. 5. Press the BACK button to save your selection. Settings for the number of prints and for index prints are saved in a Digital Print Order Format (DPOF) file on the camera's memory card.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley PRINT Image Matching is a new standard that allows digital cameras to record special information about the photos it takes and relay that information seamlessly to a printer compatible with this standard. Your PhotoPC 3100Z records this special information in each JPEG photo it takes. By using a printer that is also compatible with the PRINT Image Matching system, you can achieve printing results that were until now unattainable.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley MAKESET.FM Pass 3 Making settings to print an index To make settings for printing an index of all photos saved in the memory card, follow the steps below. 1. Select the photos you want to be included in the index as described in the previous section. 2. Turn the dial switch to the 3. To make the setting for printing an index, press the Index button to select On. position.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 COMPUTER.FM Pass 3 Chapter 5 Using Images on Your Computer This chapter prepares you to transfer your photos, video clips, and audio recordings from the camera’s memory card to your computer. The following topics are covered.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COMPUTER.FM Pass 3 Microsoft® Windows 98 pre-installed, Windows Millennium Edition, or Windows 2000 pre-installed QuickTime 4.1.2 or later For Macintosh The Included Software The EPSON Camera Software CD-ROM that comes with your PhotoPC 3100Z digital camera contains the following EPSON software.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley ❏ EPSON CardMonitor Utility that enables EPSON CameraStarter to start automatically by detecting when the camera is connected to your computer, or when the memory card is inserted into a PC Card slot. ❏ EPSON PhotoQuicker Software for printing your images. ❏ Panorama Stitcher Light EP Software for creating panoramas by combining overlapping images, especially those taken using your PhotoPC 3100Z’s stitch assist feature.
L R4C7850 Rev. C A5 size 4/27/01 3. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COMPUTER.FM Pass 3 The following dialog box containing a list of software appears. Software with a check mark next to it will be installed on your PC in the order listed. Click a software title in the list to remove or add a check mark. Note: ❏ Be sure to install all the software when installing software for the first time.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Installing the Software for Macintosh Users Follow the steps in the sections below to install the USB driver and other software on the included PhotoPC 3100Z Camera Software CD-ROM. R R4C7850 Rev. C A5 size 4/27/01 3. COMPUTER.FM Pass 3 Double-click the Installer icon. The following dialog box appears with a list of the software that will be installed. Installing EPSON Photo!4 and other software 1.
L R4C7850 Rev. C A5 size 4/27/01 ❏ 4. COMPUTER.FM Pass 3 On the Macintosh OS 9, the USB driver is not installed. The PhotoPC 3100Z uses the USB driver included in Macintosh OS 9. To begin installing the software, click the Start button. Follow the on-screen instructions. Note for Macintosh OS 8.5.x users: Panorama Stitcher Light EP is not available and will not be installed. 5. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Installing Acrobat Reader Acrobat Reader is necessary for viewing the online EPSON Digital Camera Software Users Guide. Follow the steps below to install Acrobat Reader. Note: If Acrobat Reader is already installed on your computer, skip to the next section to set up EPSON CameraStarter. 1. Turn on the computer and insert the included CD in the CD-ROM drive. 2.
L R4C7850 Rev. C A5 size 4/27/01 1. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COMPUTER.FM Pass 3 Start EPSON CameraStarter as described below. Note: Never insert or remove a memory card from your camera while the camera is on. For instructions on connecting your camera to your computer, see “Connecting the camera to your computer” on page 5-9. In Windows Click Start, point to Programs, then to EPSON Camera and then to ESPON Photo!4, then click EPSON CameraStarter.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Connecting the camera to your computer A5 size 4/27/01 ❏ You can connect your PhotoPC 3100Z to a Windows or Macintosh computer using the included USB cable. Before connecting your camera, make sure that the USB driver is installed in your computer (except for Windows 2000 and Macintosh OS 9). For installation instructions, see “Installing the Software for Windows Users” on page 5-3 or “Installing the Software for Macintosh Users” on page 5-5.
L R4C7850 Rev. C A5 size 4/27/01 3. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COMPUTER.FM Pass 3 Open the connector cover on the side of the camera. Insert the other end of the USB cable into the interface connector. Make sure that the shape of the cable connector corresponds to the shape of the interface connector. When you connect the camera, the green indicator light next to the viewfinder blinks while the connection is being established.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley c R R4C7850 Rev. C A5 size 4/27/01 COMPUTER.FM Pass 3 The Unplug or Eject Hardware dialog box appears. Caution: Be sure to follow these steps when disconnecting the camera. Doing otherwise may damage the camera or memory card, and could cause your computer to function improperly. Note: You can also right-click the eject icon in the task bar, then click Unplug or eject hardware to display the Unplug or Eject Hardware dialog box.
L R4C7850 Rev. C A5 size 4/27/01 COMPUTER.FM Pass 3 Disconnecting the camera from a Macintosh 1. On the desktop, move the EPSON_DSC icon into the Trash. 2. Remove the USB cable, or turn off the camera. Transferring Images to Your Computer The EPSON software that came with your PhotoPC 3100Z allows you to transfer image and audio recording files taken with your camera to your computer’s hard drive in a convenient and organized way.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Copying files directly from the memory card A5 size 4/27/01 2. To copy files to your computer, follow these steps. Note: ❏ When inserting the memory card into a Macintosh using the optional PCMCIA adapter, you must enable the PC Exchange extension software to access files on memory cards. See your Macintosh documentation for more information. ❏ 1. COMPUTER.FM Pass 3 For photos, find and double-click the DCIM folder on the memory card drive.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley COMPUTER.FM Pass 3 Viewing the Software User’s Guides on Your Computer 2. . Note: If the EPSON Installation Program dialog box does not appear, double-click the My Computer icon. Click the CD-ROM icon, then select Open from the File menu. Then double-click Setup.exe. For information on using the included software, you can view the following user’s guides on your computer.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Note: If the EPSON folder does not appear on your desktop, double-click the EPSON icon on your desktop. 2. Double-click the Manual folder. R R4C7850 Rev. C A5 size 4/27/01 COMPUTER.FM Pass 3 For Macintosh Double-click the EPSON PhotoQuicker3.0 folder on your hard drive, then double-click the EPSON PhotoQuicker User’s Manual icon.
L R4C7850 Rev. C A5 size 4/27/01 5-16 COMPUTER.FM Pass 3 Using Images on Your Computer Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 OPTIONS.FM Pass 3 Chapter 6 Camera Options and Accessories This chapter describes how to use the options that are available from EPSON to expand the memory and flexibility of your PhotoPC 3100Z. The following topics are included in this chapter.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley OPTIONS.FM Pass 3 The following table shows the approximate photo storage capacity of the 16 MB CompactFlash Card using various image quality and compression settings.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley 3. Insert the adapter into your computer’s Type II PCMCIA slot. R R4C7850 Rev. C A5 size 4/27/01 OPTIONS.FM Pass 3 1. Make sure the memory card is inserted in the camera. See “Installing and removing a CompactFlash Card” on page 1-11. 2. Turn on the camera, turn the dial switch to then press Memory SETUP. , Note: If no memory card is installed in the camera, the Memory SETUP button is unavailable.
L R4C7850 Rev. C A5 size 4/27/01 OPTIONS.FM Pass 3 Using Rechargeable Batteries You can use Ni-MH rechargeable batteries (Model EU-24) with your PhotoPC 3100Z, instead of the included four AA (IEC LR6) alkaline batteries. The rechargeable batteries help you save time and money that you might otherwise spend buying replacement alkaline batteries. Be sure to charge your new rechargeable batteries before installing them in the camera. c Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Using the AC Adapter The AC adapter (B867✽✽1) allows you to connect your PhotoPC 3100Z to a standard electrical outlet. This is especially useful when you are previewing pictures, transferring pictures, operating the camera from your computer, or using the Print Mark program. The adapter powers the camera, but does not charge the batteries. In some locations the AC adapter comes with a separate AC power cable.
L R4C7850 Rev. C A5 size 4/27/01 3. Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley OPTIONS.FM Pass 3 Plug the adapter cable into the DC port on the camera. Using the Lens Adapter The lens adapter allows you to mount an accessory lens onto the camera lens. You can mount a 49-mm diameter lens (sold separately). To mount the accessory lens, screw the lens adapter onto the camera lens, then screw the accessory lens onto it. 4. Plug the AC adapter into an electrical outlet.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 TRBLE.FM Pass 3 Chapter 7 Maintenance and Troubleshooting The PhotoPC 3100Z is easy to take care of, and most problems can be solved quickly and easily. This chapter helps you maintain your camera and contains information on the following topics.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley TRBLE.FM Pass 3 Cleaning the camera ❏ Where it will be exposed to direct sunlight. For example, on a car dashboard Keep the following in mind when cleaning the camera. ❏ Use a clean, dry cloth to keep the camera free of dust. Near sources of bright light or high humidity ❏ Near sources of heat or in a closed car ❏ Do not use harsh or abrasive cleaners.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley The camera has no power. The camera may have shut off automatically. To turn the power back on, press the POWER button. Alternatively, you can turn the camera back on by pressing the shutter button, or pressing a button on the back of the camera, depending on the camera’s dial switch position. See “Turning the camera back on” on page 4-20 for more details. Make sure that the batteries are installed correctly.
L R4C7850 Rev. C A5 size 4/27/01 TRBLE.FM Pass 3 The camera takes too long to take a picture. You may be pressing the shutter button all the way down at once. This forces the camera to focus, make exposure adjustments, and capture the image all at the same time. To make the process more efficient, you can have the camera perform these operations separately. First, depress the shutter button halfway to lock the auto focus, then press the shutter button the rest of the way down to take the photo.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Nothing appears on the LCD monitor when the camera’s dial switch is set to , , or . Make sure that the batteries are installed correctly. See “Installing the batteries” on page 1-5. Also, make sure that you are using appropriate batteries and that they are charged. See “Replacing the batteries” on page 1-6. The camera may have shut off automatically. Press the POWER button to turn the camera back on.
L R4C7850 Rev. C A5 size 4/27/01 TRBLE.FM Pass 3 Nothing appears on the TV monitor when the camera is connected to your television. Make sure that the AV cable is connected correctly. For details, see “Viewing Pictures on a Television” on page 3-9. Make sure that the camera is on and that the dial switch is turned to . Make sure that the television is switched to video mode. Make sure that the batteries are installed correctly. See “Installing the batteries” on page 1-5.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Picture problems If you are not satisfied with the pictures that you get from your PhotoPC 3100Z, you may need to adjust some of the camera’s settings, or you may need to brush up on your photography techniques. Try the suggestions listed below. The picture on the computer screen and/or printout differs in quality from the image displayed on the LCD monitor. The PhotoPC 3100Z captures images in 24-bit color (16 million colors).
L R4C7850 Rev. C A5 size 4/27/01 TRBLE.FM Pass 3 Your picture is too dark (underexposed). You may need to use the flash. Set the flash to , , , or , following the instructions given in “Setting the flash” on page 4-4. When you use the built-in flash, make sure that you are within the effective flash range of 50 to 420 centimeters for a wide-angle shot, and 50 to 340 centimeters for a telephoto shot.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Use image-editing software to adjust the picture's brightness and contrast. When you use the external flash, EPSON recommends setting the camera to Manual camera mode to get the correct exposure. Part of your picture is missing. Make sure that you are not blocking the lens with your finger, the strap, clothing, or other objects. A horizontal or vertical red line appears on your picture. Red lines are caused by glare.
L R4C7850 Rev. C A5 size 4/27/01 7-10 TRBLE.FM Pass 3 Maintenance and Troubleshooting Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 SPEC.FM Pass 3 Appendix A Specifications Product type Camera Type Digital still AF camera with LCD monitor CCD 1/1.8 inch color area CCD (3.3 megapixels) Zoom Optical ×3 zoom Digital ×2 zoom LCD monitor 1.
L R4C7850 Rev. C A5 size 4/27/01 SPEC.FM Pass 3 Recorded image Data types JPEG image following Exif Ver.2.1 and recorded based on Design rule for camera file system (16 million colors, 24 bit) Note: Exif is a standard format for audio/ image files. Design rule for camera file system is a recording standard for image files. These standards have been established by the Japan Electronics and Information Technology Industries Association (JEITA).
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Optical SPEC.FM Pass 3 Self timer Ten seconds Lens f = 7 - 21 mm (equivalent to a 34 - 102 mm lens on a 35 mm camera) F2 (7 mm) - F2.5 (21 mm) Flash Built-in automatic luminance control flash (an external flash, which is sold separately, can be attached) Focal length 0.5 m to infinity 0.2 m to 0.5 m (macro mode) From 0.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley SPEC.FM Pass 3 Functional Power Photo processing time in seconds (approximate) Image quality mode Photo processing time Photo processing time for playback Standard 0.7 0.5 Fine 1.0 0.5 Super fine 1.0 0.5 HyPict JPG* 18 0.5 TIFF 22 0.5 * For HyPict JPG, the processing time varies depending on the subject of the photograph. Interface A-4 USB Max.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 Battery Charger SPEC.FM Pass 3 Temperature Charging: 5 to 35°C Storage: -20 to 30°C Humidity 45 to 85% RH Weight Approx. 25 g per cell Model EU-38 Input AC 100 - 240 V, 50 - 60 Hz Output DC 1.2 V 490 mA × 4 Compatible batteries EPSON Ni-MH Batteries (Model EU-24) Charging time Max. 240 min.
L R4C7850 Rev. C A5 size 4/27/01 Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley SPEC.FM Pass 3 Optional PCMCIA Adapter Interface PCMCIA PC Card ATA Card slot type Type II Physical Dimensions: Width Height Depth 54.0 mm 85.6 mm 5.0 mm Optional AC Adapter Model EU-40 Input AC 100 - 240 V, 50 - 60 Hz Output DC 7.0 V, 2.0 A Power consumption Max. 0.4 A, 19 W Physical Dimensions: Width Height Depth Weight A-6 Specifications 43 mm 31 mm 104 mm Approx.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 SETTINGS.FM Pass 3 Appendix B Dial Position Settings The PhotoPC 3100Z has six dial positions. This appendix shows the available settings in each dial position.
L R4C7850 Rev. C A5 size 4/27/01 SETTINGS.FM Pass 3 Available Settings in the A B C D G Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley F Dial Position Button name key (for this appendix only) Button Sequence Month, day, year, hour, and minutes (See page 4-19) 1. Press A. 2. Press A to change the order of the date display. 3. Press B or C to make setting for current item. 4. Press E or F to change item. 5. Repeat steps 2 and 3 as necessary. 6. Press G when finished.
A5 size 4/27/01 Available Settings in the A B C D G F R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley Dial Position Button name key (for this appendix only) Setting Number of prints for currently displayed photo (See page 4-23) SETTINGS.FM Pass 3 Button Sequence 1. Press B or C to choose photo. 2. Press print button to increase number of prints. E print button Note: To make settings in this dial position, you must first select an image for printing.
L R4C7850 Rev. C A5 size 4/27/01 SETTINGS.FM Pass 3 Available Settings in the A B C D G Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley F Dial Position Button name key (for this appendix only) E Setting Play back video clip (See page 3-5) 1. 2. 3. 4. Press G, then press D. Press B or C to choose clip. Press A to play clip. When finished, press G three times. Erase video clip (See page 3-8) 1. 2. 3. 4. Press G, then press D. Press B or C to choose clip.
A5 size 4/27/01 Available Settings in the A B C D G F Dial Position Button name key (for this appendix only) E Note: To make settings in this dial position, you must first press the MENU ON/OFF button to turn on the LCD monitor. When finished making settings, press the button again to turn the LCD monitor off. When using the Program camera mode Setting R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
L R4C7850 Rev. C A5 size 4/27/01 SETTINGS.FM Pass 3 Available Settings in the A B C D G Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley F Dial Position Button name key (for this appendix only) E When using the Program camera mode Setting Button Sequence Macro (See page 2-13) Press D until Basic exposure (See page 4-11) Press B or C to change exposure value. White balance (See page 4-9) Press E to select AUTO, FIX or CUSTOM.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 GLOSS.FM Pass 3 Glossary application image A software program that helps you carry out a particular task, such as word processing, image editing, or financial planning. Data representing a two-dimensional scene. A digital image is composed of pixels arranged in a rectangular array with a certain height and width.
L R4C7850 Rev. C A5 size 4/27/01 GLOSS.FM Pass 3 NTSC TIFF National Television Standards Committee. A video encoding standard primarily used in North America and Japan. Phase Alternation Line. A video encoding standard primarily used in Europe and Australia. A file format for storing color and grayscale images in files with little or no data compression. (TIFF files made with the PhotoPC 3100Z receive no data compression.
R R4C7850 Rev. C Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley A5 size 4/27/01 PPC3100Z.
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.
setting up position, 4-3 to 4-7, 4-10, 4-17, 4-19 to 4-22, B-2 viewfinder position, 2-6 to 2-9, 4-1 to 4-18, B-5 Digital zoom, 2-12 Diopter correction, 1-2, 2-6 Disconnecting the camera from a Macintosh, 5-12 from your computer in Windows 2000, 5-11 from your computer in Windows Me and 98, 5-11 Display panel icons, 1-4 location, 1-2 Disposing of batteries, 1-9 Divided brightness metering system, 4-17 DPOF file, 4-22 E EPSON AutoDownloader installing in Windows, 5-3 installing on your Macintosh, 5-5 EPSON C
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.
using to take pictures, 2-9 to 2-13 LCD monitor buttons, 1-3 names, 2-5 using, 2-5 Lens, 1-2 Lens adapter, 1-2, 6-6 Lights indicator, 1-3, 1-4, 2-6, 2-7, 2-10 timer, 1-2, 2-8 Locking photos, 3-6 Low battery icon, 1-4 M Macro feature, 2-13 Maintenance, 7-1 Manual camera mode, 4-7, 4-9 Manual exposure, 4-16 Manual focus settings, 4-8 Memory card, See CompactFlash Card MENU ON/OFF button, 1-3, 2-9, 4-1, B-5 Metering system settings, 4-16 Microphone, 1-3 Monochrome/color setting, 4-7 MOV file format, 5-13 Mult
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R.
L R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.
Proof Sign-off: K. Pipa CRE Tsutagawa K. Pipa CRE R. Hopley R R4C7850 Rev. C A5 size 4/27/01 PPC3100Z.
Proof Sign-off: Ohtera Fujimori Pipa R R4 _______ _______ _______ A5 size 9/8/99 MARKET.FM Pass 0 EPSON OVERSEAS MARKETING LOCATIONS EPSON AMERICA, INC. EPSON UK LTD. EPSON DEUTSCHLAND GmbH EPSON FRANCE S.A. 20770 Madrona Ave. P.O. Box 2842 Torrance, CA 90509-2842 Phone: (800) 922-8911 Fax: (310) 782-5220 Campus 100, Maylands Avenue, Hemel Hempstead, Herts, HP2 7TJ, U.K.
Color Digital Camera Color Digital Camera User's Guide User's Guide User's Guide 4014069 -00
