User's Guide

Note: When the projector is in 3D mode, the aspect ratio is automatically set to Normal.
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal.
Normal Displays images using the full projection area and maintains the
aspect ratio of the image.
Zoom Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Anamorphic Wide (PowerLite Displays images that have a 2.40:1 aspect ratio when using a
Pro Cinema 6030UB) commercially available anamorphic lens.
Note: When using the Anamorphic Wide aspect ratio setting,
make sure Overscan is set to Off or the image will not display
correctly.
Horiz. Squeeze (PowerLite Pro Displays images using the full width of the projection area when
Cinema 6030UB) using a commercially available anamorphic lens.
Note: The Auto aspect ratio setting is available only for HDMI and component image sources.
Parent topic: Image Aspect Ratio
Related references
Input Signal Settings - Signal Menu
Color Mode
The projector offers different Color Modes to provide optimum brightness, contrast, and color for a
variety of viewing environments and image types. You can select a mode designed to match your image
and environment, or experiment with the available modes.
If you always want to use a particular color mode for a certain video input source, you can select it using
the projector menus.
55