User`s guide

2-4 Printing on Continuous Paper
R4C3730
Rev. B
A5 size CHAP2.FM
5/10/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Use the following table to set the paper thickness lever to match
the thickness of your paper.
Note:
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Paper type* Lever position
Ordinary continuous paper 0
Thin paper -1 or 0
Carbonless multipart forms with:**
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
1
2
3
5
Continuous paper with labels*** 2
* See Appendix C for complete paper specifications.
** It is recommended that multi-part forms be used with the optional
tractor unit installed in the front push or pull position.
*** Continuous paper with labels cannot be used with the rear push
tractor. To use them, install the optional tractor unit in the front push
or pull position.