User`s guide

C-18 Specifications

R4C3730

Rev. B

A5 size APPC.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

Character Tables

You can select the character tables shown in this section using the printer’s

default-setting mode or with software commands.

Note:

❏

Most of the character tables are the same as the PC 437 table for hex codes 00

through 7F; for these tables, only the characters for hex codes 80 through FF

are shown.

❏

The character tables with an asterisk (*) after the table name are available only

in some countries.

PC 437 (US Standard Europe)