User`s guide

Using EPSON Status Monitor 2 6-3

R4C3730

Rev. B

A5 size CHAP6.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

Installing EPSON Status Monitor 2

Note:

If you installed EPSON Status Monitor 2 when you installed the printer

software, you do not need to install it again.

To install the Status Monitor, follow these steps:

1. Make sure Windows is running. Insert the printer software

CD in the CD-ROM drive. (If you an using printer software

floppy disks insert disk 1 in a disk drive. Then double-click

the drive icon.

2. If a dialog box appears, click Quit.

3. Click Start, and select Run.

4. Type D:\STM2\SETUP.

5. Click OK and then follow the instructions on the screen.

Note:

If the dialog box below appears, and if your printer is connected directly

to your computer, select

Monitor local printers

. If it is connected

through a network, select

Monitor Windows shared printers

. Then

click

After you install EPSON Status Monitor 2 and restart your

computer, the Status Monitor starts automatically and adds a

printer-shaped background monitoring icon to the taskbar at the

bottom of your computer screen. This icon appears only when the

Status Monitor is active.