User`s guide

5-10 Changing Printer Settings From the Printer’s Control Panel

R4C3730

Rev. B

A5 size CHAP5.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

2. Hold down the Condensed button while you press the

Operate button to turn on the printer. The printer enters the

default-setting mode and prints the language selection

instructions (one page).

3. Press the Font button until the Font lights indicate the

language you want, as described in the language selection

instructions.

4. Press the Condensed button to print the default-setting

mode instructions (two pages) in the language you selected.

The printed instructions list the default settings you can

change, describe how to change them, and show you how the

control panel lights help you make settings. Follow these

instructions to change the default settings using the buttons

on the printer’s control panel.

Note:

The arrows on the instruction sheets indicate the printer’s current

settings.

5. When you finish making settings, press the Operate button

to turn off the printer and exit the default-setting mode. Any

settings you have made remain in effect until you change

them again.

Note:

You may exit the default-setting mode by turning off the printer while

the printer is not printing.