Service manual

3.2.1. Before Starting Disassembly Procedures
1. Remove the following parts:
➮ Front edge guide assembly ➅ Front cover ➆ Bottom cover
➬ Rear edge guide assembly ➉ Printer cover ➴ Paper eject assembly
. ➄ Front/rear tractor assembly ➦ Ribbon cartridge
Refer to the following figure.
Remove the paper eject cover and the front/rear tractor assembly by pushing to release the hooks
at both sides. When remounting them, be sure to snap the hooks on the projecting parts.
2
5
8
3
1
3
4
6
7
Figure 3-3 Before Starting the Disassembly Procedure
LQ-2070 Service Manual Disassembly and Assembly
Rev.A 3-5