Service manual
Product Description
LQ-2070 Service Manuai
Continuous Paper with Labels
●
Paper/media specifications
The following table gives the specifications for continuous paper with
labels.
Table 1-16 Specifications for Continuous Paper with Labels
Front Entry
Rear Entry Bottom Entry
Minimum Maximum
Minimum Maximum Minimum
Maximum
Label size See the figure below
---
See the figure below
Base sheet width
101 mm 406 mm
--
101
mm
406
mm
(4.0”) (16”)
. . .
(4.0”) (16”)
Base sheet length
101
mm
559 mm 101 mm
559 mm
(one page)
(4.0”) (22”)
‘-
‘
--
(4.0”) (22”)
Base sheet thickness 0.07 mm
0.09
mm
0.07 mm
0.09 mm
(0,0028”)
(0.0035)
‘-
‘
--
(0.0028”) (0.0035”)
Total thickness
0.16 mm
0.19 mm
0.16 mm 0.19 mm
(0.0063”)
(0.0075”)
‘--
‘
--
(0.0063”) (0.0075”)
Label weight
68
g/m2
(17 lb)
-..
68
g/m2
(17 lb)
Quality
. A very continuous
. Avery continuous
form labels
form labels
. A very mini-line or
.-.
. Avery mini-line or
equivalent quality
equivalent quality
labels
labels
%
Printing on labels is available only at normal temperatures and humidity.
*
The base sheet for the labels must be continuous paper.
%
Continuous paper with labels should be inserted from the front or bottom entrance.
<
2.5inch
(63.5mm) min.
>
—
T
15/16inch
(23.6mm)
min.
Label
Figure 1-6 Label Size
RO.linch
(2.5mm)
min.
. Printable size and area
The figure above is the printable size for the labels.
The printable area for the base sheet containing the labels
depends on conditions in Figure 1-5 and Table
-
1-15.
1-14
Rev.A