Service manual

LC?-2070 Service Manual
Product Description
● Printable area Figure 1-3 shows the printable area for cut sheets. The table
b;low defines the abbreviations used in the figure.
Table 1-10 Printable Area for Cut Sheets
Abbreviations Single Sheet
Multipart
PW (width)
Refer to Table 1-8.
Refer to Table 1-9.
PL (length)
Refer to Table 1-8.
Refer to Table 1-9.
LM (left margin) 3 mm (0.12”) or more
3 mm (0.1 2“) or more
(PW ~ 364 mm (14.33”)) (PW <364 mm (14.33”))
25 mm (0.98”) or more 25 mm (0.98”) or more
(PW = 420 mm (16.5”)) (PW = 420 mm (16.5”))
RM (right margin)
3 mm or more 3 mm or more
(PWs 364 mm (14.33”))
(PW S 364 mm (14.33”))
25 mm (0.98”) or more 25 mm (0.98”) or more
(PW = 420 mm (16.5”))
(PW = 420 mm (16.5”))
TM (top margin)
4.2 mm (0.17”) or more
4.2 mm (0.17”) or more
BM (bottom margin) 4.2 mm (0.17”) or more
4.2 mm (0.1 7“) or more
I
———
TM
7
——-
?
J
———
BM
}
— ———
?
Figure 1-3 Printable Area for cut Sheets ‘
PL
t
—
Rev.A
1-9