Service manual
Product Description
LQ-2070 Service Manual
1.2.3 Paper Handling Specifications
●
Feeding method
Friction feed
(front, rear)
Push tractor feed
(front, rear)
Push and pull tractor feed
(front, rear, bottom)
. Feeder
Front push
tractor(option),
mar push tractor,
CSFbin
1 /bin 2 (Option)
Pull tractor (Option) and roll paper holder (Option)
. Paper path
Manual insertion
Front or rear in, top out
CSF
Rear in, top out
Tractor
Front, rear, or bottom in, top out
●
Line spacing
1/6 inch or progr
amrnable
in increments of 1/360 inch.
●
Feed speed
1/6 inch feed 45 msec
Continuous feed 0.127 m /see ( 5.0 inches/see)
. Release lever
Set the release lever, using the following table.
Table 1-6 Paper Path and Paper Types
Paper Types
Lever
Position
Paper Entrance
Single Sheet Labels
Card Stock
I
Envelopes
Multipart
Roll Paper
Front
insedion
OK
NO
OK% OK
NO
Rear insertion
OK
NO
OK OK
NO
Friction
CSF
bin 1 OK
NO
OK OK
NO
CSF
bin 2
OK
NO
NO
NO
NO
Roll paper holder
NO
NO
NO
NO
OK
Rear
Push
OK
OK%
NO
OK
NO
tractor
Push-pull OK
OK%
NO
OK
NO
Front
Push
OK
OK%
NO
OK
NO
tractor
Push-pull OK
OK%
NO
OK
NO
Full
Pull (front bottom)
OK
OK
NO
OK
NO
release
Pull (rear)
OK
OK
X
NO
OK
NO
%
This symbol after “OK” means you need to check the paper type before using it with this paper
path.
1-s
Rev.A